This commit is contained in:
davedatum 2019-10-28 16:21:25 +00:00
parent 879782165d
commit ab6471f92f
72 changed files with 3008 additions and 238 deletions

View File

@ -1,87 +0,0 @@
---
componentName: manjaro
# This selects between different welcome texts. When false, uses
# the traditional "Welcome to the %1 installer.", and when true,
# uses "Welcome to the Calamares installer for %1." This allows
# to distinguish this installer from other installers for the
# same distribution.
welcomeStyleCalamares: ${welcomestyle}
# Should the welcome image (productWelcome, below) be scaled
# up beyond its natural size? If false, the image does not grow
# with the window but remains the same size throughout (this
# may have surprising effects on HiDPI monitors).
welcomeExpandingLogo: ${welcomelogo}
# Size and expansion policy for Calamares.
# - "normal" or unset, expand as needed, use *windowSize*
# - "fullscreen", start as large as possible, ignore *windowSize*
# - "noexpand", never expand, use *windowSize*
windowExpanding: ${windowexp}
# Size of Calamares window, expressed as w,h. Both w and h
# may be either pixels (suffix px) or font-units (suffix em).
# e.g. "800px,600px"
# "60em,480px"
# This setting is ignored if "fullscreen" is selected for
# *windowExpanding*, above. If not set, use constants defined
# in CalamaresUtilsGui, 800x520.
windowSize: ${windowsize}
# These are strings shown to the user in the user interface.
# There is no provision for translating them -- since they
# are names, the string is included as-is.
#
# The four Url strings are the Urls used by the buttons in
# the welcome screen, and are not shown to the user. Clicking
# on the "Support" button, for instance, opens the link supportUrl.
# If a Url is empty, the corresponding button is not shown.
#
# bootloaderEntryName is how this installation / distro is named
# in the boot loader (e.g. in the GRUB menu).
strings:
productName: ${dist_name} Linux
shortProductName: ${dist_name}
version: ${dist_release}
shortVersion: ${dist_release}
versionedName: ${dist_name} Linux ${dist_release} "${dist_codename}"
shortVersionedName: ${dist_name} ${dist_release}
bootloaderEntryName: ${dist_name}
# These images are loaded from the branding module directory.
#
# productIcon is used as the window icon, and will (usually) be used
# by the window manager to represent the application. This image
# should be square, and may be displayed by the window manager
# as small as 16x16 (but possibly larger).
# productLogo is used as the logo at the top of the left-hand column
# which shows the steps to be taken. The image should be square,
# and is displayed at 80x80 pixels (also on HiDPI).
# productWelcome is shown on the welcome page of the application in
# the middle of the window, below the welcome text. It can be
# any size and proportion, and will be scaled to fit inside
# the window. Use `welcomeExpandingLogo` to make it non-scaled.
# Recommended size is 320x150.
images:
productLogo: "logo.png"
productIcon: "logo.png"
productWelcome: "languages.png"
# The slideshow is displayed during execution steps (e.g. when the
# installer is actually writing to disk and doing other slow things).
slideshow: "show.qml"
# Colors for text and background components.
#
# - sidebarBackground is the background of the sidebar
# - sidebarText is the (foreground) text color
# - sidebarTextHighlight sets the background of the selected (current) step.
# Optional, and defaults to the application palette.
# - sidebarSelect is the text color of the selected step.
#
style:
sidebarBackground: "${sidebackground}"
sidebarText: "${sidebartext}"
sidebarTextSelect: "${sidebartextselect}"
sidebarTextHighlight: "${sidebartexthighlight}"

View File

@ -1,12 +0,0 @@
awesome
bspwm
bspwm-mate
budgie
cinnamon
deepin
i3
lxde
lxqt
mate
openbox
webdad

View File

@ -1 +0,0 @@
xfce

View File

@ -1,6 +0,0 @@
architect
gnome
kde
lxqt
netinstall
xfce

View File

@ -1,2 +0,0 @@
gnome-edition
mate-edition

View File

@ -1,3 +0,0 @@
carch="i686"
chost="i686-pc-linux-gnu"
cflags="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"

View File

@ -1,3 +0,0 @@
carch="x86_64"
chost="x86_64-pc-linux-gnu"
cflags="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"

View File

@ -1,3 +0,0 @@
carch="x86_64"
chost="x86_64-pc-linux-gnu"
cflags="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"

View File

@ -1,120 +0,0 @@
######################################################
################ manjaro-tools.conf ##################
######################################################
# default target branch
# target_branch=stable
# default taget arch: auto detect
# target_arch=$(uname -m)
# cache dir where buildpkg, buildtree cache packages/pkgbuild, builiso iso files
# cache_dir=/var/cache/manjaro-tools
# build dir where buildpkg or buildiso chroots are created
# chroots_dir=/var/lib/manjaro-tools
# log dir where log files are created
# log_dir='/var/log/manjaro-tools'
# custom build mirror server
# build_mirror=https://mirror.netzspielplatz.de/manjaro/packages
################ buildtree ###############
# manjaro package tree
# repo_tree=('core' 'extra' 'community' 'multilib')
# host_tree=https://github.com/manjaro
# default https seems slow; try this
# host_tree_abs=git://projects.archlinux.org/svntogit
################ buildpkg ################
# default pkg build list; name without .list extension
# build_list_pkg=default
################ buildiso ################
#default branch for iso-profiles repo: v18.0 Illyria master>development release
# branch=v18.0
# default iso build list; name without .list extension
# build_list_iso=default
# the dist release; default: auto
# dist_release=18.0
# the dist codename; default: auto
dist_codename="Trade Free"
# the OS branding; default: auto
dist_name=TROMjaro
# the branding; default: auto
dist_branding="tromjaro"
# compression used, possible values xz (default, best compression), gzip, lzma, lzo, lz4
# lz4 is faster but worst compression, may be useful for locally testing isos
# iso_compression=xz
# unset defaults to given value
# kernel="linux419"
# gpg key; leave empty or commented to skip sfs signing
# gpgkey=""
########## calamares preferences ##########
#See branding.desc.d for reference
# welcome style for calamares: true="Welcome to the %1 installer." ; false="Welcome to the Calamares installer for %1." (default)
# welcomestyle=false
# welcome image scaled (productWelcome)
# welcomelogo=true
# size and expansion policy for Calamares (possible value: normal,fullscreen,noexpand)
# windowexp=noexpand
# size of Calamares window, expressed as w,h.
# (possible units: pixel (px) or font-units (em))
# windowsize="800px,520px"
# colors for text and background components:
# background of the sidebar
# sidebarbackground=#454948
# text color
# sidebartext=#efefef
# background of the selected step
# sidebartextselect=#4d915e
# text color of the selected step
# sidebartexthighlight=#1a1c1b
################ deployiso ################
# the server user
# account=[SetUser]
# Set to 'true' to use ssh-agent to store passphrase.
# ssh_agent=false
# use alternative storage server (one or the other might be more stable)
# alt_storage=false
# the server project: manjaro|manjaro-community
# determined automatically based on profile if unset
# project="[SetProject]"
# set upload bandwidth limit in kB/s
# limit=
# the torrent tracker urls, comma separated
# tracker_url='udp://mirror.strits.dk:6969'
# Piece size, 2^n
# piece_size=21

View File

@ -1 +0,0 @@
manjaro-system

View File

@ -0,0 +1,53 @@
# GRUB boot loader configuration
GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="TROMjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet udev.log_priority=3"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
GRUB_BACKGROUND="/usr/share/grub/trom-background.png"
#GRUB_THEME="/usr/share/grub/themes/Vimix/theme.txt"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

View File

@ -0,0 +1,221 @@
# ------------------------------------------------------------------------------
# tlp - Parameters for power save
# Hint: some features are disabled by default, remove the leading # to enable them
# Set to 0 to disable/1 to enable TLP
TLP_ENABLE=1
# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
# Important:
# - You *must* disable your distribution's governor settings or conflicts will occur
# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your cpu. For available frequencies see
# tlp-stat output, Section "+++ Processor".
# Hint: Parameters are disabled by default, remove the leading # to enable them,
# otherwise kernel default values are used.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set the cpu "turbo boost" feature: 0=disable / 1=allow
# Requires an Intel Core i processor and kernel 3.7 or later.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used cpu cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Hard disk devices, separate multiple devices with spaces (default: sda).
# Devices can be specified by disk id too (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Hard disk advanced power management level: 1(max saving)..254(off)
# Levels 1..127 may spin down the disk.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="254 254"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# (see 'man hdparm' for details)
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"
# SATA aggressive link power management (ALPM):
# min_power/medium_power/max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
# PCI Express Active State Power Management (PCIe ASPM):
# default/performance/powersave
# Hint: needs kernel boot option pcie_aspm=force on some machines
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low/mid/high/auto/default
# auto = mid on BAT, high on AC; default = use hardware defaults
# (Kernel >= 2.6.35 only, not with fglrx driver!)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# New radeon dynamic power management method (dpm): battery/performance
# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
# New radeon dpm performance level: auto/low/high (auto is recommended)
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
# WiFi power saving mode: 1=disable/5=enable
# (Linux 2.6.32 and later, some adapters only!)
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
# Disable wake on lan: Y/N
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables / >=1 enables power save.
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y
# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
# when running on battery. A value of 0 disables this Feature (Default).
# Drive can be powered on again by releasing (and reinserting) the
# eject lever or by pressing the disc eject button on newer models.
# Note: an UltraBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0)
BAY_DEVICE="sr0"
# Runtime Power Management for pci(e) bus devices
# (Kernel >= 2.6.35 only): on=disable/auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Runtime PM for *all* pci(e) bus devices, expect backlisted ones:
# 0=disable / 1=enable
# Warning: experimental option, could cause system instabilities
RUNTIME_PM_ALL=0
# Exclude pci(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
# Set to 0 to disable/1 to enable usb autosuspend feature
USB_AUTOSUSPEND=1
# Devices from the following list are excluded from usb autosuspend
# (separate with spaces). Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"
# WWAN devices are excluded from usb autosuspend:
# 0=do not exclude / 1=exclude
# Note: works for ids 05c6:* 0bdb:* 1199:* only
USB_BLACKLIST_WWAN=1
# Set to 1 to disable autosuspend before shutdown/0 to do nothing
# (workaround for usb devices that cause shutdown problems)
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
# on system startup: 0=disable/1=enable
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth wifi wwan
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth wifi wwan
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth wifi wwan
# (workaround for devices that are blocking shutdown)
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth wifi wwan
# (to prevent other operating systems from missing radios)
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable when wireless radio switch is turned on:
# bluetooth wifi wwan (Ubuntu + ThinkPad only)
#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
# value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay or slice battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
# and force usage of tp-smapi instead
#DISABLE_TPACPIBAT=1
# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth/wifi/wwan
# Hint: parameters are disabled by default, remove the leading # to enable them
# Radio devices to disable on connect
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""

View File

@ -0,0 +1,5 @@
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
/dev/mapper/root-image / auto defaults 0 0

View File

@ -0,0 +1,13 @@

Manjaro Live ISO (\l) - \s-\r \m
# Welcome to Manjaro #
login for the live environment:
user 'manjaro'
password 'manjaro'

View File

@ -0,0 +1,6 @@
#%PAM-1.0
auth sufficient pam_rootok.so
auth sufficient pam_wheel.so trust use_uid
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so

View File

@ -0,0 +1,7 @@
[notifications]
checkLanguagePackages=false
checkNewKernel=false
checkNewKernelLts=false
checkNewKernelRecommended=false
checkUnsupportedKernel=false
checkUnsupportedKernelRunning=false

View File

@ -0,0 +1 @@
%wheel ALL=(ALL) NOPASSWD: ALL

View File

@ -0,0 +1,23 @@
---
componentName: TROMjaro
strings:
productName: TROMjaro Linux
shortProductName: TROMjaro
version: 18
shortVersion: 18
versionedName: TROMjaro Linux
shortVersionedName: TROMjaro
bootloaderEntryName: TROMjaro
images:
productLogo: "logo.png"
productIcon: "logo.png"
productWelcome: "languages.png"
slideshow: "show.qml"
style:
sidebarBackground: "#454948"
sidebarText: "#efefef"
sidebarTextSelect: "#9E4F5D"

Binary file not shown.

After

Width:  |  Height:  |  Size: 28 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 11 KiB

View File

@ -0,0 +1,131 @@
/* === This file is part of Calamares - <http://github.com/calamares> ===
*
* Copyright 2015, Teo Mrnjavac <teo@kde.org>
*
* Calamares is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Calamares is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Calamares. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* Slides images dimensions are 800x440px.
*/
import QtQuick 2.0;
import calamares.slideshow 1.0;
Presentation
{
id: presentation
Timer {
interval: 20000
running: true
repeat: true
onTriggered: presentation.goToNextSlide()
}
Slide {
Image {
id: background1
source: "slide1.png"
width: 800; height: 440
fillMode: Image.PreserveAspectFit
anchors.centerIn: parent
}
Text {
anchors.horizontalCenter: background1.horizontalCenter
anchors.top: background1.bottom
text: ""
wrapMode: Text.WordWrap
width: 800
horizontalAlignment: Text.Center
}
}
Slide {
Image {
id: background2
source: "slide2.png"
width: 800; height: 440
fillMode: Image.PreserveAspectFit
anchors.centerIn: parent
}
Text {
anchors.horizontalCenter: background2.horizontalCenter
anchors.top: background2.bottom
text: ""
wrapMode: Text.WordWrap
width: 800
horizontalAlignment: Text.Center
}
}
Slide {
Image {
id: background3
source: "slide3.png"
width: 800; height: 440
fillMode: Image.PreserveAspectFit
anchors.centerIn: parent
}
Text {
anchors.horizontalCenter: background3.horizontalCenter
anchors.top: background3.bottom
text: ""
wrapMode: Text.WordWrap
width: 800
horizontalAlignment: Text.Center
}
}
Slide {
Image {
id: background4
source: "slide4.png"
width: 800; height: 440
fillMode: Image.PreserveAspectFit
anchors.centerIn: parent
}
Text {
anchors.horizontalCenter: background4.horizontalCenter
anchors.top: background4.bottom
text: ""
wrapMode: Text.WordWrap
width: 800
horizontalAlignment: Text.Center
}
}
Slide {
Image {
id: background5
source: "slide5.png"
width: 800; height: 440
fillMode: Image.PreserveAspectFit
anchors.centerIn: parent
}
Text {
anchors.horizontalCenter: background5.horizontalCenter
anchors.top: background5.bottom
text: ""
wrapMode: Text.WordWrap
width: 800
horizontalAlignment: Text.Center
}
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 80 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 94 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 83 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 75 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 79 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 8.1 KiB

View File

@ -0,0 +1,54 @@
# Bootloader configuration. The bootloader is installed to allow
# the system to start (and pick one of the installed operating
# systems to run).
---
# Define which bootloader you want to use for EFI installations
# Possible options are 'grub', 'sb-shim' and 'systemd-boot'.
efiBootLoader: "grub"
# systemd-boot configuration files settings, set kernel and initramfs file names
# and amount of time before default selection boots
kernel: "_ALL_kver_"
img: "_default_image_"
fallback: "_fallback_image_"
timeout: "10"
# Optionally set the menu entry name and kernel name to use in systemd-boot.
# If not specified here, these settings will be taken from branding.desc.
#
# bootloaderEntryName: "Manjaro"
kernelLine: ", with _manjaro_kernel_"
fallbackKernelLine: ", with _manjaro_kernel_ (fallback initramfs)"
# GRUB 2 binary names and boot directory
# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
# These names are also used when using sb-shim, since that needs some
# GRUB functionality (notably grub-probe) to work. As needed, you may use
# complete paths like `/usr/bin/efibootmgr` for the executables.
#
grubInstall: "grub-install"
grubMkconfig: "grub-mkconfig"
grubCfg: "/boot/grub/grub.cfg"
grubProbe: "grub-probe"
efiBootMgr: "efibootmgr"
# Optionally set the bootloader ID to use for EFI. This is passed to
# grub-install --bootloader-id.
#
# If not set here, the value from bootloaderEntryName from branding.desc
# is used, with problematic characters (space and slash) replaced.
#
# The ID is also used as a directory name within the EFI environment,
# and the bootloader is copied from /boot/efi/EFI/<dirname>/ . When
# setting the option here, keep in mind that the name is sanitized
# (problematic characters, see above, are replaced).
#
# efiBootloaderId: "dirname"
# Optionally install a copy of the GRUB EFI bootloader as the EFI
# fallback loader (either bootia32.efi or bootx64.efi depending on
# the system). This may be needed on certain systems (Intel DH87MC
# seems to be the only one). If you set this to false, take care
# to add another module to optionally install the fallback on those
# boards that need it.
installEFIFallback: true

View File

@ -0,0 +1,14 @@
---
requirements:
- name: /etc
mode: "0o755"
- name: /var/cache/pacman/pkg
mode: "0o755"
- name: /var/lib/pacman
mode: "0o755"
isRank: true
keyrings:
- archlinux
- manjaro

View File

@ -0,0 +1,46 @@
# Configuration for the contextual process job.
#
# Contextual processes are based on **global** configuration values.
# When a given global value (string) equals a given value, then
# the associated command is executed.
#
# The special top-level keys *dontChroot* and *timeout* have
# meaning just like in shellprocess.conf. They are excluded from
# the comparison with global variables.
#
# Configuration consists of keys for global variable names (except
# *dontChroot* and *timeout*), and the sub-keys are strings to compare
# to the variable's value. If the variable has that particular value, the
# corresponding value (script) is executed.
#
# You can check for an empty value with "".
#
# As a special case, the value-check "*" matches any value, but **only**
# if no other value-check matches. Use it as an *else* form for value-
# checks. Take care to put the asterisk in quotes. The value-check "*"
# **also** matches a literal asterisk as value; a confusing corner case
# is checking for an asterisk **and** having a wildcard match with
# different commands. This is currently not possible.
#
# Global configuration variables are not checked in a deterministic
# order, so do not rely on commands from one variable-check to
# always happen before (or after) checks on another
# variable. Similarly, the value-equality checks are not
# done in a deterministic order, but all of the value-checks
# for a given variable happen together. As a special case, the
# value-check for "*" (the *else* case) happens after all of the
# other value-checks, and only matches if none of the others do.
#
# The values after a value sub-keys are the same kinds of values
# as can be given to the *script* key in the shellprocess module.
# See shellprocess.conf for documentation on valid values.
---
dontChroot: false
firmwareType:
efi:
- "-pkg remove efi-firmware"
- command: "-mkinitramfsrd -abgn"
timeout: 120 # This is slow
bios: "-pkg remove bios-firmware"
"": "/bin/false no-firmware-type-set"
"*": "/bin/false some-other-firmware-value"

View File

@ -0,0 +1,58 @@
# Configure one or more display managers (e.g. SDDM)
# with a "best effort" approach.
#
# This module also sets up autologin, if the feature is enabled in
# globalstorage (where it would come from the users page).
---
# The DM module attempts to set up all the DMs found in this list, in the
# precise order listed. The displaymanagers list can also be set in
# globalstorage, and in that case it overrides the setting here.
#
# If *sysconfigSetup* is set to *true* (see below, only relevant for
# openSUSE derivatives) then this list is ignored and only sysconfig
# is attempted. You can also list "sysconfig" in this list instead.
#
displaymanagers:
- slim
- sddm
- lightdm
- gdm
- mdm
- lxdm
- kdm
# Enable the following settings to force a desktop environment
# in your displaymanager configuration file. This will attempt
# to configure the given DE (without checking if it is installed).
# The DM configuration for each potential DM may **or may not**
# support configuring a default DE, so the keys are mandatory
# but their interpretation is up to the DM configuration.
#
# Subkeys of *defaultDesktopEnvironment* are (all mandatory):
# - *executable* a full path to an executable
# - *desktopFile* a .desktop filename
#
# If this is **not** set, then Calamares will look for installed
# DE's and pick the first one it finds that is actually installed.
#
# If this **is** set, and the *executable* key doesn't point to
# an installed file, then the .desktop file's TryExec key is
# used instead.
#
#defaultDesktopEnvironment:
# executable: "startkde"
# desktopFile: "plasma"
#If true, try to ensure that the user, group, /var directory etc. for the
#display manager are set up correctly. This is normally done by the distribution
#packages, and best left to them. Therefore, it is disabled by default.
basicSetup: false
# If true, setup autologin for openSUSE. This only makes sense on openSUSE
# derivatives or other systems where /etc/sysconfig/displaymanager exists.
#
# The preferred way to pick sysconfig is to just list it in the
# *displaymanagers* list (as the only one).
#
sysconfigSetup: false

View File

@ -0,0 +1,44 @@
# Configuration for the "finished" page, which is usually shown only at
# the end of the installation (successful or not).
---
# DEPRECATED
#
# The finished page can hold a "restart system now" checkbox.
# If this is false, no checkbox is shown and the system is not restarted
# when Calamares exits.
# restartNowEnabled: true
# DEPRECATED
#
# Initial state of the checkbox "restart now". Only relevant when the
# checkbox is shown by restartNowEnabled.
# restartNowChecked: false
# Behavior of the "restart system now" button.
#
# There are four usable values:
# - never
# Does not show the button and does not restart.
# This matches the old behavior with restartNowEnabled=false.
# - user-unchecked
# Shows the button, defaults to unchecked, restarts if it is checked.
# This matches the old behavior with restartNowEnabled=true and restartNowChecked=false.
# - user-checked
# Shows the button, defaults to checked, restarts if it is checked.
# This matches the old behavior with restartNowEnabled=true and restartNowChecked=true.
# - always
# Shows the button, checked, but the user cannot change it.
# This is new behavior.
#
# The three combinations of legacy values are still supported.
restartNowMode: user-unchecked
# If the checkbox is shown, and the checkbox is checked, then when
# Calamares exits from the finished-page it will run this command.
# If not set, falls back to "shutdown -r now".
restartNowCommand: "systemctl -i reboot"
# When the last page is (successfully) reached, send a DBus notification
# to the desktop that the installation is done. This works only if the
# user as whom Calamares is run, can reach the regular desktop session bus.
notifyOnFinished: false

View File

@ -0,0 +1,49 @@
# Module that resizes a single FS to fill the entire (rest) of
# a device. This is used in OEM situations where an image is
# flashed onto an SD card (or similar) and used to boot a device,
# after which the FS should expand to fill the SD card.
#
# Example: a distro produces a 6GiB large image that is
# written to an 8GiB SD card; the FS should expand to take
# advantage of the unused 2GiB. The FS should expand much
# more if the same image is written to a 16GiB card.
---
# Which FS needs to be grown? Choose one way to identify it:
# - *fs* names a mount point which should already be mounted
# in the system.
# - *dev* names a device
fs: /
# dev: /dev/mmcblk0p1
# How much of the total remaining space should the FS use?
# The only sensible amount is "all of it". The value is
# in percent, so set it to 100. Perhaps a fixed size is
# needed (that would be weird though, since you don't know
# how big the card is), use MiB as suffix in that case.
# If missing, then it's assumed to be 0, and no resizing
# will happen.
#
# Percentages apply to **available space**.
size: 100%
# Resizing might not be worth it, though. Set the minimum
# that it must grow; if it cannot grow that much, the
# resizing is skipped. Can be in percentage or absolute
# size, as above. If missing, then it's assumed to be 0,
# which means resizing is always worthwhile.
#
# If *atleast* is not zero, then the setting *required*,
# below, becomes relevant.
#
# Percentages apply to **total device size**.
#atleast: 1000MiB
# When *atleast* is not zero, then the resize may be
# recommended (the default) or **required**. If the
# resize is required and cannot be carried out (because
# there's not enough space), then that is a fatal
# error for the installer. By default, resize is only
# recommended and it is not an error for no resize to be
# carried out.
required: false

View File

@ -0,0 +1,33 @@
# Creates /etc/fstab and /etc/crypttab in the target system.
# Also creates mount points for all the filesystems.
#
# When creating fstab entries for a filesystem, this module
# uses the options for the filesystem type to write to the
# options field of the file.
---
# Mount options to use for all filesystems. If a specific filesystem
# is listed here, use those options, otherwise use the *default*
# options from this mapping.
mountOptions:
default: defaults,noatime
btrfs: defaults,noatime,space_cache,autodefrag
# Mount options to use for the EFI System Partition. If not defined, the
# *mountOptions* for *vfat* are used, or if that is not set either,
# *default* from *mountOptions*.
efiMountOptions: umask=0077
# If a filesystem is on an SSD, add the following options. If a specific
# filesystem is listed here, use those options, otherwise no additional
# options are set (i.e. there is no *default* like in *mountOptions*).
ssdExtraMountOptions:
ext4: discard
jfs: discard
xfs: discard
swap: discard
btrfs: discard,compress=lzo
# Additional options added to each line in /etc/crypttab
crypttabOptions: luks
# For Debian and Debian-based distributions, change the above line to:
# crypttabOptions: luks,keyscript=/bin/cat

View File

@ -0,0 +1,25 @@
# Write lines to /etc/default/grub (in the target system) based
# on calculated values and the values set in the *defaults* key
# in this configuration file.
#
# Calculated values are:
# - GRUB_DISTRIBUTOR, branding module, *bootloaderEntryName*
# - GRUB_ENABLE_CRYPTODISK, based on the presence of filesystems
# that use LUKS
# - GRUB_CMDLINE_LINUX_DEFAULT, adding LUKS setup and plymouth
# support to the kernel.
---
# If set to true, always creates /etc/default/grub from scratch even if the file
# already existed. If set to false, edits the existing file instead.
overwrite: false
# Default entries to write to /etc/default/grub if it does not exist yet or if
# we are overwriting it.
#
defaults:
GRUB_TIMEOUT: 5
GRUB_DEFAULT: "saved"
GRUB_DISABLE_SUBMENU: true
GRUB_TERMINAL_OUTPUT: "console"
GRUB_DISABLE_RECOVERY: true

View File

@ -0,0 +1,22 @@
# Run mkinitcpio(8) with the given preset value
---
# This key defines the kernel to be loaded.
# It can have the following values:
# - empty or unset, interpreted as "all"
# - the literal string "$uname" (without quotes, with dollar),
# which will use the output of `uname -r` to determine the
# running kernel, and use that.
# - any other string.
#
# Whatever is set, that string is passed as *preset* argument to the
# `-p` option of *mkinitcpio*. Take care that both "$uname" operates
# in the host system, and might not be correct if the target system is
# updated (to a newer kernel) as part of the installation.
#
# Note that "all" is probably not a good preset to use either.
kernel: linux312
# Set this to true to turn off mitigations for lax file
# permissions on initramfs (which, in turn, can compromise
# your LUKS encryption keys, CVS-2019-13179).
be_unsafe: false

View File

@ -0,0 +1,16 @@
# NOTE: you must have ckbcomp installed and runnable
# on the live system, for keyboard layout previews.
---
# The name of the file to write X11 keyboard settings to
# The default value is the name used by upstream systemd-localed.
# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d
xOrgConfFileName: "/etc/X11/xorg.conf.d/00-keyboard.conf"
# The path to search for keymaps converted from X11 to kbd format
# Leave this empty if the setting does not make sense on your distribution.
convertedKeymapPath: "/lib/kbd/keymaps/xkb"
# Write keymap configuration to /etc/default/keyboard, usually
# found on Debian-related systems.
# Defaults to true if nothing is set.
#writeEtcDefaultKeyboard: true

View File

@ -0,0 +1,45 @@
# Configuration file for License viewmodule, Calamares
# Syntax is YAML 1.2
---
# Define a list of licenses which may / must be accepted before continuing.
#
# Each entry in this list has the following keys:
# - id Entry identifier, must be unique. Not user visible. YAML: string.
# - name Pretty name for the software product, user visible and untranslatable. YAML: string.
# - vendor Pretty name for the software vendor, user visible and untranslatable. YAML: string, optional, default is empty.
# - type Package type identifier for presentation, not user visible but affects user visible strings. YAML: string.
# values: driver, gpudriver, browserplugin, codec, package, software; optional, default is software.
# - required If set to true, the user cannot proceed without accepting this license. YAML: boolean, optional, default is false.
# - url A URL for the license; a remote URL is not shown in Calamares, but a link
# to the URL is provided, which opens in the default web browser. A local
# URL (i.e. file:///) assumes that the contents are HTML or plain text, and
# displays the license in-line. YAML: string, mandatory.
entries:
- id: nvidia
name: Nvidia
vendor: Nvidia Corporation
type: driver
url: http://developer.download.nvidia.com/cg/Cg_3.0/license.pdf
required: false
- id: amd
name: Catalyst
vendor: "Advanced Micro Devices, Inc."
type: gpudriver
url: http://support.amd.com/en-us/download/eula
required: false
- id: flashplugin
name: Adobe Flash
vendor: Adobe Systems Incorporated
type: browserplugin
url: http://www.adobe.com/products/eulas/pdfs/PlatformClients_PC_WWEULA_Combined_20100108_1657.pdf
required: true
# This example uses a file: link. This example uses a relative link, which
# is relative to where you run Calamares. Assuming you run it from build/
# as part of your testing, you'll get the LICENSE text for Calamares
# (which is the text of the GPLv3, not proprietary at all).
- id: mine_mine
name: Calamares Proprietary License
vendor: Calamares, Inc.
type: software
required: true
url: file:../LICENSE

View File

@ -0,0 +1,97 @@
---
# This settings are used to set your default system time zone.
# Time zones are usually located under /usr/share/zoneinfo and
# provided by the 'tzdata' package of your Distribution.
#
# Distributions using systemd can list available
# time zones by using the timedatectl command.
# timedatectl list-timezones
#
# The starting timezone (e.g. the pin-on-the-map) when entering
# the locale page can be set through keys *region* and *zone*.
# If either is not set, defaults to America/New_York.
#
region: "America"
zone: "New_York"
# System locales are detected in the following order:
#
# - /usr/share/i18n/SUPPORTED
# - localeGenPath (defaults to /etc/locale.gen if not set)
# - 'locale -a' output
#
# Enable only when your Distribution is using an
# custom path for locale.gen
#
#localeGenPath: "PATH_TO/locale.gen"
# GeoIP based Language settings: Leave commented out to disable GeoIP.
#
# GeoIP needs a working Internet connection.
# This can be managed from `welcome.conf` by adding
# internet to the list of required conditions.
#
# The configuration
# is in three parts: a *style*, which can be "json" or "xml"
# depending on the kind of data returned by the service, and
# a *url* where the data is retrieved, and an optional *selector*
# to pick the right field out of the returned data (e.g. field
# name in JSON or element name in XML).
#
# The default selector (when the setting is blank) is picked to
# work with existing JSON providers (which use "time_zone") and
# Ubiquity's XML providers (which use "TimeZone").
#
# If the service configured via *url* uses
# a different attribute name (e.g. "timezone") in JSON or a
# different element tag (e.g. "<Time_Zone>") in XML, set this
# string to the name or tag to be used.
#
# In JSON:
# - if the string contains "." characters, this is used as a
# multi-level selector, e.g. "a.b" will select the timezone
# from data "{a: {b: "Europe/Amsterdam" } }".
# - each part of the string split by "." characters is used as
# a key into the JSON data.
# In XML:
# - all elements with the named tag (e.g. all TimeZone) elements
# from the document are checked; the first one with non-empty
# text value is used.
#
#
# An HTTP(S) request is made to *url*. The request should return
# valid data in a suitable format, depending on *style*;
# generally this includes a string value with the timezone
# in <region>/<zone> format. For services that return data which
# does not follow the conventions of "suitable data" described
# below, *selector* may be used to pick different data.
#
# Note that this example URL works, but the service is shutting
# down in June 2018.
#
# Suitable JSON data looks like
# ```
# {"time_zone":"America/New_York"}
# ```
# Suitable XML data looks like
# ```
# <Response><TimeZone>Europe/Brussels</TimeZone></Response>
# ```
#
# To accommodate providers of GeoIP timezone data with peculiar timezone
# naming conventions, the following cleanups are performed automatically:
# - backslashes are removed
# - spaces are replaced with _
#
# Legacy settings "geoipStyle", "geoipUrl" and "geoipSelector"
# in the top-level are still supported, but I'd advise against.
#
# To disable GeoIP checking, either comment-out the entire geoip section,
# or set the *style* key to an unsupported format (e.g. `none`).
# Also, note the analogous feature in src/modules/welcome/welcome.conf.
#
geoip:
style: "json"
url: "https://geoip.kde.org/v1/calamares"
selector: "" # leave blank for the default

View File

@ -0,0 +1,4 @@
# Writes an openswap configuration with LUKS settings to the given path
---
# Path of the configuration file to write (in the target system)
configFilePath: /etc/openswap.conf

View File

@ -0,0 +1,24 @@
# Machine-ID and other random data on the target system.
#
# This module can create a number of "random" things on the target:
# - a systemd machine-id file (hence the name of the Calamares module)
# with a random UUID.
# - a dbus machine-id file (or, optionally, link to the one from systemd)
# - an entropy file
#
---
# Whether to create /etc/machine-id for systemd.
systemd: true
# Whether to create /var/lib/dbus/machine-id for D-Bus.
dbus: true
# Whether /var/lib/dbus/machine-id should be a symlink to /etc/machine-id
# (ignored if dbus is false, or if there is no /etc/machine-id to point to).
dbus-symlink: true
# this is a deprecated form of *dbus-symlink*
symlink: true
# Whether to create an entropy file
entropy: false
# Whether to copy entropy from the host
entropy-copy: false

View File

@ -0,0 +1,19 @@
---
bus:
- pci
# - usb
identifier:
net:
- 200
- 280
video:
- 300
- 302
- 380
driver: free
local: true
repo: /opt/mhwd/pacman-mhwd.conf

View File

@ -0,0 +1,36 @@
# Mount filesystems in the target (generally, before treating the
# target as a usable chroot / "live" system). Filesystems are
# automatically mounted from the partitioning module. Filesystems
# listed here are **extra**. The filesystems listed in *extraMounts*
# are mounted in all target systems. The filesystems listed in
# *extraMountsEfi* are mounted in the target system **only** if
# the host machine uses UEFI.
---
# Extra filesystems to mount. The key's value is a list of entries; each
# entry has four keys:
# - device The device node to mount
# - fs The filesystem type to use
# - mountPoint Where to mount the filesystem
# - options (optional) Extra options to pass to mount(8)
#
extraMounts:
- device: proc
fs: proc
mountPoint: /proc
- device: sys
fs: sysfs
mountPoint: /sys
- device: /dev
mountPoint: /dev
options: bind
- device: tmpfs
fs: tmpfs
mountPoint: /run
- device: /run/udev
mountPoint: /run/udev
options: bind
extraMountsEfi:
- device: efivarfs
fs: efivarfs
mountPoint: /sys/firmware/efi/efivars

View File

@ -0,0 +1,23 @@
---
# This is the URL that is retrieved to get the netinstall groups-and-packages
# data (which should be in the format described in netinstall.yaml), e.g.:
# groupsUrl: http://example.org/netinstall.php
# or it can be a locally installed file:
# groupsUrl: file:///usr/share/calamares/netinstall.yaml
#
# Note that the contents of the groups file is the **important**
# part of the configuration of this module. It specifies what
# the user may select and what commands are to be run.
#
# The format of the groups file is documented in `README.md`.
#
# groupsUrl: file:///usr/share/calamares/netinstall.yaml
# If the installation can proceed without netinstall (e.g. the Live CD
# can create a working installed system, but netinstall is preferred
# to bring it up-to-date or extend functionality) leave this set to
# false (the default). If set to true, the netinstall data is required.
#
# This only has an effect if the netinstall data cannot be retrieved,
# or is corrupt: having "required" set, means the install cannot proceed.
required: false

View File

@ -0,0 +1,13 @@
# This is an OEM setup (phase-0) configuration file.
---
# The batch-identifier is written to /var/log/installer/oem-id.
# This value is put into the text box as the **suggested**
# OEM ID. If @@DATE@@ is included in the identifier, then
# that is replaced by the current date in yyyy-MM-dd (ISO) format.
#
# it is ok for the identifier to be empty.
#
# The identifier is written to the file as UTF-8 (this will be no
# different from ASCII, for most inputs) and followed by a newline.
# If the identifier is empty, only a newline is written.
batch-identifier: neon-@@DATE@@

View File

@ -0,0 +1,2 @@
---
configFilePath: /etc/conf.d/dmcrypt

View File

@ -0,0 +1,106 @@
# Configuration for the low-density software chooser
---
# The packagechooser writes a GlobalStorage value for the choice that
# has been made. The key is *packagechooser_<id>*. If *id* is set here,
# it is substituted into the key name. If it is not set, the module's
# instance name is used; see the *instances* section of `settings.conf`.
# If there is just one packagechooser module, and no *id* is set,
# resulting GS key is probably *packagechooser_packagechooser*.
#
# The GS value is a comma-separated list of the IDs of the selected
# packages, or an empty string if none is selected.
#
# id: ""
# Software selection mode, to set whether the software packages
# can be chosen singly, or multiply.
#
# Possible modes are "optional", "required" (for zero or one)
# or "optionalmultiple", "requiredmultiple" (for zero-or-more
# or one-or-more).
mode: required
# Human-visible strings in this module. These are all optional.
# The following translated keys are used:
# - *step*, used in the overall progress view (left-hand pane)
#
# Each key kan have a [locale] added to it, which is used as
# the translated string for that locale. For the strings
# associated with the "no-selection" item, see *items*, below
# with the explicit id "".
#
labels:
step: "Office Suite"
step[de]: "Office-Paket"
# Items to display in the chooser. In general, this should be a
# pretty short list to avoid overwhelming the UI. This is a list
# of objects, and the items are displayed in list order.
#
# Either provide the data for an item in the list (using the keys
# below), or use existing AppData XML files, or use AppStream cache
# as a source for the data.
#
# For data provided by the list: the item has an id, which is used in
# setting the value of *packagechooser_<module-id>*). The following fields
# are mandatory:
#
# - *id* ID for the product. The ID "" is special, and is used for
# "no package selected". Only include this if the mode allows
# selecting none.
# - *package* Package name for the product. While mandatory, this is
# not actually used anywhere.
# - *name* Human-readable name of the product. To provide translations,
# add a *[lang]* decoration as part of the key name, e.g. `name[nl]`
# for Dutch. The list of usable languages can be found in
# `CMakeLists.txt` or as part of the debug output of Calamares.
# - *description* Human-readable description. These can be translated
# as well.
# - *screenshot* Path to a single screenshot of the product. May be
# a filesystem path or a QRC path (e.g. ":/images/no-selection.png").
#
# Use the empty string "" as ID / key for the "no selection" item if
# you want to customize the display of that item as well.
#
# For data provided by AppData XML: the item has an *appdata*
# key which points to an AppData XML file in the local filesystem.
# This file is parsed to provide the id (from AppData id), name
# (from AppData name), description (from AppData description paragraphs
# or the summary entries), and a screenshot (the defautl screenshot
# from AppData). No package is set (but that is unused anyway).
#
# AppData may contain IDs that are not useful inside Calamares,
# and the screenshot URL may be remote -- a remote URL will not
# be loaded and the screenshot will be missing. An item with *appdata*
# **may** specify an ID or screenshot path, as above. This will override
# the settings from AppData.
#
# For data provided by AppStream cache: the item has an *appstream*
# key which matches the AppStream identifier in the cache (e.g.
# *org.kde.kwrite.desktop*). Data is retrieved from the AppStream
# cache for that ID. The package name is set from the AppStream data.
#
# An item for AppStream may also contain an *id* and a *screenshot*
# key which will override the data from AppStream.
items:
- id: ""
package: ""
name: "No Office Suite"
name[de]: "Kein Office Paket"
description: "Please pick an office suite from the list. If you don't want to install an office suite, that's fine, you can install one later as needed."
description[de]: "Bitte wählen Sie ein Office-Paket von der Liste. Wenn Sie kein Office installieren wollen, kann dies auch zu einer späteren Zeitpunkt erfolgen."
screenshot: ":/images/choose-office.jpg"
- id: "libreoffice-still"
package: "libreoffice-still"
name: "LibreOffice"
name[de]: "LibreOffice"
description: "LibreOffice is a powerful and free office suite, used by millions of people around the world. Its clean interface and feature-rich tools help you unleash your creativity and enhance your productivity."
description[de]: "LibreOffice ist ein leistungsstarkes Office-Paket. Die klare Oberfläche und mächtigen Werkzeuge lassen Sie Ihre Kreativität entfalten und Ihre Produktivität steigern."
screenshot: ":/images/LibreOffice.jpg"
- id: "freeoffice"
package: "freeoffice"
name: "FreeOffice"
name[de]: "FreeOffice"
description: "FreeOffice is a powerful Office suite with word processing, spreadsheet and presentation software. It is seamlessly compatible with Microsoft Office and can be used free of charge. For long-term use, request a free product key directly in the application."
description[de]: "FreeOffice ist ein leistungsstarkes Office-Paket mit Textverarbeitung, Tabellenkalkulation und Präsentationssoftware. Es ist nahtlos kompatible zu Microsoft Office und kann frei genutzt werden. Für eine Langzeitnutzung kann ein Produktkey im Programm angefordert werden."
screenshot: ":/images/FreeOffice.jpg"

View File

@ -0,0 +1,170 @@
---
#
# Which package manager to use, options are:
# - packagekit - PackageKit CLI tool
# - zypp - Zypp RPM frontend
# - yum - Yum RPM frontend
# - dnf - DNF, the new RPM frontend
# - urpmi - Mandriva package manager
# - apt - APT frontend for DEB and RPM
# - pacman - Pacman
# - portage - Gentoo package manager
# - entropy - Sabayon package manager
# - dummy - Dummy manager, only logs
#
backend: dummy
#
# Often package installation needs an internet connection.
# Since you may allow system installation without a connection
# and want to offer OPTIONAL package installation, it's
# possible to have no internet, yet have this packages module
# enabled in settings.
#
# You can skip the whole module when there is no internet
# by setting "skip_if_no_internet" to true.
#
# You can run a package-manager specific update procedure
# before installing packages (for instance, to update the
# list of packages and dependencies); this is done only if there
# is an internet connection.
#
# Set "update_db" to 'true' for refreshing the database on the
# target system. On target installations, which got installed by
# unsquashing, a full system update may be needed. Otherwise
# post-installing additional packages may result in conflicts.
# Therefore set also "update_system" to 'true'.
#
skip_if_no_internet: false
update_db: true
update_system: false
#
# List of maps with package operations such as install or remove.
# Distro developers can provide a list of packages to remove
# from the installed system (for instance packages meant only
# for the live system).
#
# A job implementing a distro specific logic to determine other
# packages that need to be installed or removed can run before
# this one. Distro developers may want to install locale packages
# or remove drivers not needed on the installed system.
# Such a job would populate a list of dictionaries in the global
# storage called "packageOperations" and that list is processed
# after the static list in the job configuration (i.e. the list
# that is in this configuration file).
#
# Allowed package operations are:
# - install, try_install: will call the package manager to
# install one or more packages. The install target will
# abort the whole installation if package-installation
# fails, while try_install carries on. Packages may be
# listed as (localized) names, or as (localized) package-data.
# See below for the description of the format.
# - localInstall: this is used to call the package manager
# to install a package from a path-to-a-package. This is
# useful if you have a static package archive on the install media.
# The *pacman* package manager is the only one to specially support
# this operation (all others treat this the same as *install*).
# - remove, try_remove: will call the package manager to
# remove one or more packages. The remove target will
# abort the whole installation if package-removal fails,
# while try_remove carries on. Packages may be listed as
# (localized) names.
#
# There are two formats for naming packages: as a name or as package-data,
# which is an object notation providing package-name, as well as pre- and
# post-install scripts.
#
# Here are both formats, for installing vi. The first one just names the
# package for vi (using the naming of the installed package manager), while
# the second contains three data-items; the pre-script is run before invoking
# the package manager, and the post-script runs once it is done.
#
# - install
# - vi
# - package: vi
# pre-script: touch /tmp/installing-vi
# post-script: rm -f /tmp/installing-vi
#
# The pre- and post-scripts are optional, but you cannot leave both out
# if you do use the *package* key: using "package: vi" with neither script
# option will trick Calamares into trying to install a package named
# "package: vi", which is unlikely to work.
#
# The pre- and post-scripts are **not** executed by a shell unless you
# explicitly invoke `/bin/sh` in them. The command-lines are passed
# to exec(), which does not understand shell syntax. In other words:
#
# pre-script: ls | wc -l
#
# Will fail, because `|` is passed as a command-line argument to ls,
# as are `wc`, and `-l`. No shell pipeline is set up, and ls is likely
# to complain. Invoke the shell explicitly:
#
# pre-script: /bin/sh -c \"ls | wc -l\"
#
# The above note on shell-expansion applies to versions up-to-and-including
# Calamares 3.2.12, but will change in future.
#
# Any package name may be localized; this is used to install localization
# packages for software based on the selected system locale. By including
# the string `LOCALE` in the package name, the following happens:
#
# - if the system locale is English (any variety), then the package is not
# installed at all,
# - otherwise `$LOCALE` or `${LOCALE}` is replaced by the 'lower-cased' BCP47
# name of the 'language' part of the selected system locale (not the
# country/region/dialect part), e.g. selecting "nl_BE" will use "nl"
# here.
#
# Take care that just plain `LOCALE` will not be replaced, so `foo-LOCALE` will
# be left unchanged, while `foo-$LOCALE` will be changed. However, `foo-LOCALE`
# **will** be removed from the list of packages (i.e. not installed), if
# English is selected. If a non-English locale is selected, then `foo-LOCALE`
# will be installed, unchanged (no language-name-substitution occurs).
#
# The following installs localizations for vi, if they are relevant; if
# there is no localization, installation continues normally.
#
# - install
# - vi-$LOCALE
# - package: vi-${LOCALE}
# pre-script: touch /tmp/installing-vi
# post-script: rm -f /tmp/installing-vi
#
# When installing packages, Calamares will invoke the package manager
# with a list of package names if it can; package-data prevents this because
# of the scripts that need to run. In other words, this:
#
# - install:
# - vi
# - binutils
# - package: wget
# pre-script: touch /tmp/installing-wget
#
# This will invoke the package manager three times, once for each package,
# because not all of them are simple package names. You can speed up the
# process if you have only a few pre-scripts, by using multiple install targets:
#
# - install:
# - vi
# - binutils
# - install:
# - package: wget
# pre-script: touch /tmp/installing-wget
#
# This will call the package manager once with the package-names "vi" and
# "binutils", and then a second time for "wget". When installing large numbers
# of packages, this can lead to a considerable time savings.
#
operations:
- install:
- vi
- vi-${LOCALE}
- wget
- binutils
- remove:
- vi
- wget
- binutils

View File

@ -0,0 +1,137 @@
# This setting specifies the mount point of the EFI system partition. Some
# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
# etc.) use just /boot.
efiSystemPartition: "/boot/efi"
# This optional setting specifies the size of the EFI system partition.
# If nothing is specified, the default size of 300MiB will be used.
# efiSystemPartitionSize: 300M
# In autogenerated partitioning, allow the user to select a swap size?
# If there is exactly one choice, no UI is presented, and the user
# cannot make a choice -- this setting is used. If there is more than
# one choice, a UI is presented.
#
# Legacy settings *neverCreateSwap* and *ensureSuspendToDisk* correspond
# to values of *userSwapChoices* as follows:
# - *neverCreateSwap* is true, means [none]
# - *neverCreateSwap* is false, *ensureSuspendToDisk* is false, [small]
# - *neverCreateSwap* is false, *ensureSuspendToDisk* is true, [suspend]
#
# Autogenerated swap sizes are as follows:
# - *suspend*: Swap is always at least total memory size,
# and up to 4GiB RAM follows the rule-of-thumb 2 * memory;
# from 4GiB to 8 GiB it stays steady at 8GiB, and over 8 GiB memory
# swap is the size of main memory.
# - *small*: Follows the rules above, but Swap is at
# most 8GiB, and no more than 10% of available disk.
# In both cases, a fudge factor (usually 10% extra) is applied so that there
# is some space for administrative overhead (e.g. 8 GiB swap will allocate
# 8.8GiB on disk in the end).
userSwapChoices:
- none # Create no swap, use no swap
- reuse # Re-use existing swap, but don't create any (unsupported right now)
- small # Up to 4GB
- suspend # At least main memory size
- file # To swap file instead of partition (unsupported right now)
# LEGACY SETTINGS (these will generate a warning)
# ensureSuspendToDisk: true
# neverCreateSwap: false
# Correctly draw nested (e.g. logical) partitions as such.
drawNestedPartitions: false
# Show/hide partition labels on manual partitioning page.
alwaysShowPartitionLabels: true
# Default filesystem type, used when a "new" partition is made.
#
# When replacing a partition, the existing filesystem inside the
# partition is retained. In other cases, e.g. Erase and Alongside,
# as well as when using manual partitioning and creating a new
# partition, this filesystem type is pre-selected. Note that
# editing a partition in manual-creation mode will not automatically
# change the filesystem type to this default value -- it is not
# creating a new partition.
#
# Suggested values: ext2, ext3, ext4, reiser, xfs, jfs, btrfs
# If nothing is specified, Calamares defaults to "ext4".
#
# Names are case-sensitive and defined by KPMCore.
defaultFileSystemType: "ext4"
# Show/hide LUKS related functionality in automated partitioning modes.
# Disable this if you choose not to deploy early unlocking support in GRUB2
# and/or your distribution's initramfs solution.
#
# BIG FAT WARNING:
#
# This option is unsupported, as it cuts out a crucial security feature.
# Disabling LUKS and shipping Calamares without a correctly configured GRUB2
# and initramfs is considered suboptimal use of the Calamares software. The
# Calamares team will not provide user support for any potential issue that
# may arise as a consequence of setting this option to false.
# It is strongly recommended that system integrators put in the work to support
# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
# Support is offered to system integrators that wish to do so, through the
# Calamares bug tracker, as well as in #calamares on Freenode.
# For more information on setting up GRUB2 for Calamares with LUKS, see
# https://github.com/calamares/calamares/wiki/Deploy-LUKS
#
# If nothing is specified, LUKS is enabled in automated modes.
#enableLuksAutomatedPartitioning: true
# Allow manual partitioning.
#
# When set to false, this option hides the "Manual partitioning" button,
# limiting the user's choice to "Erase", "Replace" or "Alongside".
# This can be useful when using a custom partition layout we don't want
# the user to modify.
#
# If nothing is specified, manual partitioning is enabled.
#allowManualPartitioning: true
# To apply a custom partition layout, it has to be defined this way :
#
# partitionLayout:
# - name: "rootfs"
# filesystem: "ext4"
# mountPoint: "/"
# size: 20%
# minSize: 500M
# maxSize: 10G
# - name: "home"
# filesystem: "ext4"
# mountPoint: "/home"
# size: 3G
# minSize: 1.5G
# - name: "data"
# filesystem: "fat32"
# mountPoint: "/data"
# size: 100%
#
# There can be any number of partitions, each entry having the following attributes:
# - name: partition label
# - filesystem: filesystem type
# - mountPoint: partition mount point
# - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
# or
# % of the available drive space if a '%' is appended to the value
# - minSize: minimum partition size (optional parameter)
# - maxSize: maximum partition size (optional parameter)
# Checking for available storage
#
# This overlaps with the setting of the same name in the welcome module's
# requirements section. If nothing is set by the welcome module, this
# value is used instead. It is still a problem if there is no required
# size set at all, and the replace and resize options will not be offered
# if no required size is set.
#
# The value is in Gibibytes (GiB).
#
# BIG FAT WARNING: except for OEM-phase-0 use, you should be using
# the welcome module, **and** configure this value in
# `welcome.conf`, not here.
# requiredStorage: 3.5

View File

@ -0,0 +1,79 @@
# The Plasma Look-and-Feel module allows selecting a Plasma
# Look-and-Feel in the live- or host-system and switches the
# host Plasma session immediately to the chosen LnF; it
# can also write a LnF configuration to the target user / on
# the target system.
#
# This module should be used once in a view section (to get
# the UI) and once in the exec section (to apply the selection
# to the target user). It should come **after** the user module
# in exec, so that the target user has been created alrady.
---
# Full path to the Plasma look-and-feel tool (CLI program
# for querying and applying Plasma themes). If this is not
# set, no LNF setting will happen.
lnftool: "/usr/bin/lookandfeeltool"
# For systems where the user Calamares runs as (usually root,
# via either sudo or pkexec) has a clean environment, set this
# to the originating username; the lnftool will be run through
# "sudo -H -u <liveuser>" instead of directly.
#
# liveuser: "live"
# You can limit the list of Plasma look-and-feel themes by listing ids
# here. If this key is not present, all of the installed themes are listed.
# If the key is present, only installed themes that are **also** included
# in the list are shown (could be none!). See the *showAll* key, below,
# to change that.
#
# Themes may be listed by id, (e.g. fluffy-bunny, below) or as a theme
# and an image (e.g. breeze) which will be used to show a screenshot.
# Themes with no image set at all get a "missing screenshot" image; if the
# image file is not found, they get a color swatch based on the image name.
#
# The image may be an absolute path. If it is a relative path, though,
# it is searched in the current directory and in the branding directory
# (i.e. relative to the directory where your branding.desc lives).
#
# Valid forms of entries in the *themes* key:
# - A single string (unquoted), which is the theme id
# - A pair of *theme* and *image* keys, e.g.
# ```
# - theme: fluffy-bunny.desktop
# image: "fluffy-screenshot.png"
# ```
#
# The image screenshot is resized to 12x8 the current font size, with
# a minimum of 120x80 pixels. This allows the screenshot to scale up
# on HiDPI displays where the fonts are larger (in pixels).
themes:
- org.kde.fuzzy-pig.desktop
- theme: org.kde.breeze.desktop
image: "breeze.png"
- theme: org.kde.breezedark.desktop
image: "breeze-dark.png"
- org.kde.fluffy-bunny.desktop
# If *showAll* is true, then all installed themes are shown in the
# UI for selection, even if they are not listed in *themes*. This
# allows selection of all themes even while not all of them are
# listed in *themes* -- which is useful to show screenshots for those
# you do have a screenshot for.
showAll: false
# You can pre-select one of the themes; it is not applied
# immediately, but its radio-button is switched on to indicate
# that that is the theme (that is most likely) currently in use.
# Do this only on Live images where you are reasonably sure
# that the user is not going to change the theme out from under
# themselves before running the installer.
#
# If this key is present, its value should be the id of the theme
# which should be pre-selected. If absent, empty, or the pre-selected
# theme is not found on the live system, no theme will be pre-selected.
#
# As a special setting, use "*", to try to find the currently-
# selected theme by reading the Plasma configuration. This requires
# KF5::Config at build- and run-time.
preselect: "*"

View File

@ -0,0 +1,28 @@
# Plymouth Configuration Module
#
# This module can be used to setup the default plymouth theme to
# be used with your distribution
#
# You should only use this module if the plymouth package is installed
# on the build configurations of your distribution & the plymouth
# theme you want to configure is installed as well. If the unpacked
# filesystem configures a plymouth theme already, there is no need
# to change it here.
---
# Leave this commented if you want to use the default theme
# shipped with your distribution configurations. Make sure that
# the theme exists in the themes directory of plymouth path.
# Debian / Ubuntu comes with themes "joy", "script", "softwaves",
# possibly others. Look in /usr/share/plymouth/themes for more.
#
# Specifying a non-existent theme will leave the plymouth
# configuration set to that theme. It is up to plymouth to
# deal with that.
plymouth_theme: spinfinity

View File

@ -0,0 +1,4 @@
---
keyrings:
- archlinux
- manjaro

View File

@ -0,0 +1,49 @@
# Configuration for the preserve-files job
#
# The *files* key contains a list of files to preserve. Each element of
# the list should have one of these forms:
#
# - an absolute path (probably within the host system). This will be preserved
# as the same path within the target system (chroot). If, globally, dontChroot
# is true, then these items are ignored (since the destination is the same
# as the source).
# - a map with a *dest* key. The *dest* value is a path interpreted in the
# target system (if dontChroot is true, in the host system). Relative paths
# are not recommended. There are three possible other keys in the map:
# - *from*, which must have one of the values, below; it is used to
# preserve files whose pathname is known to Calamares internally.
# - *src*, to refer to a path interpreted in the host system. Relative
# paths are not recommended, and are interpreted relative to where
# Calamares is being run.
# - *perm*, is a colon-separated tuple of <user>:<group>:<mode>
# where <mode> is in octal (e.g. 4777 for wide-open, 0400 for read-only
# by owner). If set, the file's ownership and permissions are set to
# those values within the target system; if not set, no permissions
# are changed.
# Only one of the two source keys (either *from* or *src*) may be set.
#
# The target filename is modified as follows:
# - `@@ROOT@@` is replaced by the path to the target root (may be /)
# - `@@USER@@` is replaced by the username entered by on the user
# page (may be empty, for instance if no user page is enabled)
#
# Special values for the key *from* are:
# - *log*, for the complete log file (up to the moment the preservefiles
# module is run),
# - *config*, for the Calamares configuration file
# - *globals*, for a JSON dump of the contents of global storage
---
files:
- /etc/oem-information
- from: log
dest: /root/install.log
perm: root:wheel:644
- from: config
dest: /root/install.cfg
perm: root:wheel:400
# The *perm* key contains a default value to apply to all files listed
# above that do not have a *perm* key of their own. If not set,
# root:root:0400 (highly restrictive) is used.
#
# perm: "root:root:0400"

View File

@ -0,0 +1,24 @@
# Configuration for the rawfs module: raw filesystem copy to a block device
---
# To apply a custom partition layout, it has to be defined as a list of targets.
#
# For each target, the following attributes must be defined:
# * mountPoint: The mount point of the destination device on the installed system
# The corresponding block device will automatically be identified and used as the
# destination for the operation
# * source: The source filesystem; it can be the mount point of a locally (on the
# live system) mounted filesystem, a path to a disk image, or a block device
# * resize (optional): Expand the destination filesystem to fill the whole
# partition at the end of the operation; this works only with ext filesystems
# for now
targets:
- mountPoint: /
source: /
- mountPoint: /home
source: /images/home.img
resize: true
- mountPoint: /data
source: /dev/mmcblk0p3

View File

@ -0,0 +1,6 @@
# Removes a single user (with userdel) from the system.
# This is typically used in OEM setups or if the live user
# spills into the target system.
---
# Username in the target system to be removed.
username: live

View File

@ -0,0 +1,87 @@
# Systemd services manipulation.
#
# This module can enable services and targets for systemd
# (if packaging doesn't already do that). It can calso
# disable services (but not targets).
#
# First, services are enabled; then targets; then services
# are disabled -- this order of operations is fixed.
---
# There are three configuration keys for this module:
# *services*, *targets* and *disable*. The value of each
# key is a list of entries. Each entry has two keys:
# - *name* is the (string) name of the service or target that is being
# changed. Use quotes. Don't include ".target" or ".service"
# in the name.
# - *mandatory* is a boolean option, which states whether the change
# must be done successfully. If systemd reports an error while changing
# a mandatory entry, the installation will fail. When mandatory is false,
# errors for that entry (service or target) are ignored. If mandatory
# is not specified, the default is false.
#
# An entry may also be given as a single string, which is then
# interpreted as the name of the service. In this case, mandatory
# is also set to the default of false.
#
# Use [] to express an empty list.
# # This example enables NetworkManager (and fails if it can't),
# # disables cups (and ignores failure). Then it enables the
# # graphical target (e.g. so that SDDM runs for login), and
# # finally disables pacman-init (an ArchLinux-only service).
# #
# # Enables <name>.service
# services:
# - name: "NetworkManager"
# mandatory: true
# - name: "cups"
# mandatory: false
#
# # Enables <name>.target
# targets:
# - name: "graphical"
# mandatory: true
#
# # Disables <name>.service
# disable:
# - name: "pacman-init"
# mandatory: false
#
# # Disables <name>.target
# # .. this shows how to use just the name
# disable-targets:
# - graphical
#
# # Masks (stronger version of disable). This section
# # is unusual because you **must** include the suffix
# # (e.g. ".service") as part of the name, so, e.g. to mask
# # NetworkManager (rather than just disable it) you must
# # specify "NetworkManager.service" as name.
# mask:
# - name: "NetworkManager.service"
# - mandatory: true
# By default, no changes are made.
#services: []
#targets: []
#disable: []
disable-targets: []
mask: []
# Manjaro settings
services:
- name: "NetworkManager"
mandatory: false
- name: "org.cups.cupsd"
mandatory: false
targets:
- name: "graphical"
mandatory: true
disable:
- name: "pacman-init"
mandatory: false

View File

@ -0,0 +1,10 @@
---
services:
enabled:
- name: "NetworkManager"
runlevel: "default"
- name: "cups"
runlevel: "default"
# disabled:
# - name: "hwclock"
# runlevel: "boot"

View File

@ -0,0 +1,36 @@
# Configuration for the shell process job.
#
# Executes a list of commands found under the key *script*.
# If the top-level key *dontChroot* is true, then the commands
# are executed in the context of the live system, otherwise
# in the context of the target system. In all of the commands,
# the following substitutions will take place:
# - `@@ROOT@@` is replaced by the root mount point of the **target**
# system from the point of view of the command (for chrooted
# commands, that will be */*).
# - `@@USER@@` is replaced by the username, set on the user page.
#
# The (global) timeout for the command list can be set with
# the *timeout* key. The value is a time in seconds, default
# is 10 seconds if not set.
#
# If a command starts with "-" (a single minus sign), then the
# return value of the command following the - is ignored; otherwise,
# a failing command will abort the installation. This is much like
# make's use of - in a command.
#
# The value of *script* may be:
# - a single string; this is one command that is executed.
# - a list of strings; these are executed one at a time, by
# separate shells (/bin/sh -c is invoked for each command).
# - an object, specifying a key *command* and (optionally)
# a key *timeout* to set the timeout for this specific
# command differently from the global setting.
---
dontChroot: false
timeout: 10
script:
- "-touch @@ROOT@@/tmp/thingy"
- "/usr/bin/false"
- command: "/usr/local/bin/slowloris"
timeout: 3600

View File

@ -0,0 +1,88 @@
# Settings for various kinds of tracking that Distributions can
# enable. Distributions looking at tracking should be aware of
# the privacy (and hence communications) impact of that tracking,
# and are advised to consult the Mozilla and KDE policies on
# privacy and user tracking.
#
# There are three areas of tracking (-configuration) supported
# by Calamares It is up to individual Distributions to create
# suitable backends / configuration scripts for each. The
# different areas are:
#
# install: This is "phone home" functionality at the end of the
# install process. When enabled, it contacts the given
# URL. The URL can contain the special token $MACHINE,
# which is replaced by the machine-id of the installed
# system (if available, blank otherwise).
#
# machine: This enables machine-level tracking on a (semi-)
# continuous basis. It is meant to keep track of installed
# systems and their continued use / updating.
#
# user: This area enables user-level tracking, along the lines
# of the KDE User Telemetry Policy. It enables specific
# collection of data at a user- and application-level,
# possibly including actions done in an application.
# For the KDE environment, this enables user tracking
# with the appropriate framework, and the KDE User Telemetry
# policy applies.
#
# Each area has a key *enabled*. If the area is enabled, it is shown to
# the user. This defaults to off, which means no tracking would be
# configured or enabled by Calamares.
#
# Each area has a key *policy*, which is a Url to be opened when
# the user clicks on the corresponding Help button for an explanation
# of the details of that particular kind of tracking. If no policy
# is set, the help button is hidden. The example policy links
# go to Calamares' generic user manual.
#
# Each area may have other configuration keys, depending on the
# area and how it needs to be configured.
#
# Globally, there are two other keys:
#
# policy: (optional) url about tracking settings for this distro.
# default: (optional) level to enable by default
#
---
# This is the global policy; it is displayed as a link on the page.
# If blank or commented out, no link is displayed on the tracking
# page. It is recommended to either provide policy URLs for each
# area, *or* one general link, and not to mix them.
policy: "https://github.com/calamares/calamares/wiki/Users-Guide#installation-tracking"
# This is the default level to enable for tracking. If commented out,
# empty, or otherwise invalid, "none" is used, so no tracking by default.
default: user
# The install area has one specific configuration key:
# url: this URL (remember to include the protocol, and prefer https)
# is fetched (with a GET request, and the data discarded) at
# the end of the installation process. The following tokens
# are replaced in the url (possibly by blank strings, or by 0).
# - $CPU (cpu make and model)
# - $MEMORY (amount of main memory available)
# - $DISK (total amount of disk attached)
# Typically these are used as GET parameters, as in the example.
#
# Note that phone-home only works if the system has an internet
# connection; it is a good idea to require internet in the welcome
# module then.
install:
enabled: false
policy: "https://github.com/calamares/calamares/wiki/Users-Guide#installation-tracking"
# url: "https://example.com/install.php?c=$CPU&m=$MEMORY"
# The machine area has one specific configuration key:
# style: This string specifies what kind of tracking configuration
# needs to be done. There is currently only one valid
# style, "neon", which edits two files in the installed
# system to enable system-tracking.
machine:
enabled: false
style: neon
# The user area is not yet implemented, and has no specific configuration.
user:
enabled: false

View File

@ -0,0 +1,42 @@
### Umount Module
#
# This module represents the last part of the installation, the unmounting
# of partitions used for the install. It is also the last place where it
# is possible to copy files to the target system, thus the best place to
# copy an installation log.
#
# This module has two configuration keys:
# srcLog location in the live system where the log is
# destLog location in the target system to copy the log
#
# You can either use the default source path (which is
# `/root/.cache/calamares/session.log` ) to copy the regular log,
# or if you want to use the full output of `sudo calamares -d` you will need
# to redirect standard output, for instance in a launcher script or
# in the desktop file.
#
# Example launcher script:
#
# ```
# #!/bin/sh
# sudo /usr/bin/calamares -d > installation.log
# ```
#
# Example desktop line:
#
# ```
# Exec=sudo /usr/bin/calamares -d > installation.log
# ```
#
# If no source and destination are set, no copy is attempted. If the
# copy fails for some reason, a warning is printed but the installation
# does not fail.
---
# example when using the normal Calamares log:
srcLog: "/root/.cache/calamares/session.log"
destLog: "/var/log/Calamares.log"
# example when using a log created by `sudo calamares -d`:
#srcLog: "/home/live/installation.log"
#destLog: "/var/log/installation.log"

View File

@ -0,0 +1,89 @@
# Unsquash / unpack a filesystem. Multiple sources are supported, and
# they may be squashed or plain filesystems.
#
# Configuration:
#
# from globalstorage: rootMountPoint
# from job.configuration: the path to where to mount the source image(s)
# for copying an ordered list of unpack mappings for image file <->
# target dir relative to rootMountPoint.
---
# Each list item is unpacked, in order, to the target system.
#
# Each list item has the following **mandatory** attributes:
# - *source* path relative to the live / intstalling system to the image
# - *sourcefs* the type of the source files; valid entries are
# - `ext4` (copies the filesystem contents)
# - `squashfs` (unsquashes)
# - `file` (copies a file or directory)
# - (may be others if mount supports it)
# - *destination* path relative to rootMountPoint (so in the target
# system) where this filesystem is unpacked. It may be an
# empty string, which effectively is / (the root) of the target
# system.
#
# Each list item **optionally** can include the following attributes:
# - *exclude* is a list of values that is expanded into --exclude
# arguments for rsync (each entry in exclude gets its own --exclude).
# - *excludeFile* is a single file that is passed to rsync as an
# --exclude-file argument. This should be a full pathname
# inside the **host** filesystem.
#
# EXAMPLES
#
# Usually you list a filesystem image to unpack; you can use
# squashfs or an ext4 image. An empty destination is equivalent to "/",
# the root of the target system. The destination directory must exist
# in the target system.
#
# - source: "/path/to/filesystem.sqfs"
# sourcefs: "squashfs"
# destination: ""
#
# Multiple entries are unpacked in-order; if there is more than one
# item then only the first must exist beforehand -- it's ok to
# create directories with one unsquash and then to use those
# directories as a target from a second unsquash.
#
# - source: "/path/to/another/filesystem.img"
# sourcefs: "ext4"
# destination: ""
# - source: "/path/to/another/filesystem2.img"
# sourcefs: "ext4"
# destination: "/usr/lib/extra"
#
# You can list filesystem source paths relative to the Calamares run
# directory, if you use -d (this is only useful for testing, though).
#
# - source: ./example.sqfs
# sourcefs: squashfs
# destination: ""
#
# You can list individual files (copied one-by-one), or directories
# (the files inside this directory are copied directly to the destination,
# so no "dummycpp/" subdirectory is created in this example).
# Do note that the target directory must exist already (e.g. from
# extracting some other filesystem).
#
# - source: ../CHANGES
# sourcefs: file
# destination: "/tmp/derp"
# - source: ../src/modules/dummycpp
# sourcefs: file
# destination: "/tmp/derp"
#
# The *destination* and *source* are handed off to rsync, so the semantics
# of trailing slashes apply. In order to *rename* a file as it is
# copied, specify one single file (e.g. CHANGES) and a full pathname
# for its destination name, as in the example below.
unpack:
- source: ../CHANGES
sourcefs: file
destination: "/tmp/changes.txt"
- source: src/qml/calamares/slideshow
sourcefs: file
destination: "/tmp/slideshow/"
exclude: [ "*.qmlc", "qmldir" ]
# excludeFile: /etc/calamares/modules/unpackfs/exclude-list.txt

View File

@ -0,0 +1,85 @@
# Configuration for the one-user-system user module.
#
# Besides these settings, the user module also places the following
# keys into the globalconfig area, based on user input in the view step.
#
# - hostname
# - username
# - password (obscured)
# - autologinUser (if enabled, set to username)
#
# These globalconfig keys are set when the jobs for this module
# are created.
---
# Used as default groups for the created user.
# Adjust to your Distribution defaults.
defaultGroups:
- users
- lp
- video
- network
- storage
- wheel
- audio
# Some Distributions require a 'autologin' group for the user.
# Autologin causes a user to become automatically logged in to
# the desktop environment on boot.
# Disable when your Distribution does not require such a group.
autologinGroup: autologin
# You can control the initial state for the 'autologin checkbox' in UsersViewStep here.
# Possible values are: true to enable or false to disable the checkbox by default
doAutologin: true
# When set to a non-empty string, Calamares creates a sudoers file for the user.
# /etc/sudoers.d/10-installer
# Remember to add sudoersGroup to defaultGroups.
#
# If your Distribution already sets up a group of sudoers in its packaging,
# remove this setting (delete or comment out the line below). Otherwise,
# the setting will be duplicated in the /etc/sudoers.d/10-installer file,
# potentially confusing users.
sudoersGroup: wheel
# Setting this to false , causes the root account to be disabled.
setRootPassword: true
# You can control the initial state for the 'root password checkbox' in UsersViewStep here.
# Possible values are: true to enable or false to disable the checkbox by default.
# When enabled the user password is used for the root account too.
# NOTE: doReusePassword requires setRootPassword to be enabled.
doReusePassword: true
# These are optional password-requirements that a distro can enforce
# on the user. The values given in this sample file disable each check,
# as if the check was not listed at all.
#
# Checks may be listed multiple times; each is checked separately,
# and no effort is done to ensure that the checks are consistent
# (e.g. specifying a maximum length less than the minimum length
# will annoy users).
#
# The libpwquality check relies on the (optional) libpwquality library.
# Its value is a list of configuration statements that could also
# be found in pwquality.conf, and these are handed off to the
# libpwquality parser for evaluation. The check is ignored if
# libpwquality is not available at build time (generates a warning in
# the log). The Calamares password check rejects passwords with a
# score of < 40 with the given libpwquality settings.
#
# (additional checks may be implemented in CheckPWQuality.cpp and
# wired into UsersPage.cpp)
passwordRequirements:
minLength: -1 # Password at least this many characters
maxLength: -1 # Password at most this many characters
libpwquality:
- minlen=0
- minclass=0
# Shell to be used for the regular user of the target system.
# There are three possible kinds of settings:
# - unset (i.e. commented out, the default), act as if set to /bin/bash
# - empty (explicit), don't pass shell information to useradd at all
# and rely on a correct configuration file in /etc/default/useradd
# - set, non-empty, use that path as shell. No validation is done
# that the shell actually exists or is executable.
# userShell: /bin/bash

View File

@ -0,0 +1,92 @@
# Configuration for the welcome module. The welcome page
# displays some information from the branding file.
# Which parts it displays can be configured through
# the show* variables.
#
# In addition to displaying the welcome page, this module
# can check requirements for installation.
---
# Display settings for various buttons on the welcome page.
# The URLs themselves come from branding.desc is the setting
# here is "true". If the setting is false, the button is hidden.
# The setting can also be a full URL which will then be used
# instead of the one from the branding file, or empty or not-set
# which will hide the button.
showSupportUrl: true
showKnownIssuesUrl: true
showReleaseNotesUrl: true
# If this Url is set to something non-empty, a "donate"
# button is added to the welcome page alongside the
# others (see settings, above). Clicking the button opens
# the corresponding link. (This button has no corresponding
# branding.desc string)
#
# showDonateUrl: https://kde.org/community/donations/
# Requirements checking. These are general, generic, things
# that are checked. They may not match with the actual requirements
# imposed by other modules in the system.
requirements:
# Amount of available disk, in GiB. Floating-point is allowed here.
# Note that this does not account for *usable* disk, so it is possible
# to pass this requirement, yet have no space to install to.
requiredStorage: 5.5
# Amount of available RAM, in GiB. Floating-point is allowed here.
requiredRam: 1.0
# To check for internet connectivity, Calamares does a HTTP GET
# on this URL; on success (e.g. HTTP code 200) internet is OK.
internetCheckUrl: http://google.com
# List conditions to check. Each listed condition will be
# probed in some way, and yields true or false according to
# the host system satisfying the condition.
#
# This sample file lists all the conditions that are known.
check:
- storage
- ram
- power
- internet
- root
- screen
# List conditions that **must** be satisfied (from the list
# of conditions, above) for installation to proceed.
# If any of these conditions are not met, the user cannot
# continue past the welcome page.
required:
# - storage
- ram
# - root
# GeoIP checking
#
# This can be used to pre-select a language based on the country
# the user is currently in. It *assumes* that there's internet
# connectivity, though. Configuration is like in the locale module,
# but remember to use a URL that returns full data **and** to
# use a selector that will pick the country, not the timezone.
#
# To disable GeoIP checking, either comment-out the entire geoip section,
# or set the *style* key to an unsupported format (e.g. `none`).
# Also, note the analogous feature in src/modules/locale/locale.conf.
#
geoip:
style: "none"
url: "https://geoip.kde.org/v1/ubiquity" # extended XML format
selector: "CountryCode" # blank uses default, which is wrong
# User interface
#
# The "select language" icon is an international standard, but it
# might not theme very well with your desktop environment.
# Fill in an icon name (following FreeDesktop standards) to
# use that named icon instead of the usual one.
#
# Leave blank or unset to use the international standard.
#
# Known icons in this space are "set-language" and "config-language".
#
# languageIcon: set-language

View File

@ -0,0 +1,24 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* Copyright 2018, Adriaan de Groot <groot@kde.org>
*
* Calamares is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Calamares is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Calamares. If not, see <http://www.gnu.org/licenses/>.
*/
NavButton {
id: backButton
anchors.left: parent.left
visible: parent.currentSlide > 0
isForward: false
}

View File

@ -0,0 +1,23 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* Copyright 2018, Adriaan de Groot <groot@kde.org>
*
* Calamares is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Calamares is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Calamares. If not, see <http://www.gnu.org/licenses/>.
*/
NavButton {
id: forwardButton
anchors.right: parent.right
visible: parent.currentSlide + 1 < parent.slides.length;
}

View File

@ -0,0 +1,68 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* Copyright 2018, Adriaan de Groot <groot@kde.org>
*
* Calamares is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Calamares is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Calamares. If not, see <http://www.gnu.org/licenses/>.
*/
/* This is a navigation (arrow) button that fades in on hover, and
* which calls forward / backward navigation on the presentation it
* is in. It should be a child item of the presentation (not of a
* single slide). Use the ForwardButton or BackButton for a pre-
* configured instance that interacts with the presentation.
*/
import QtQuick 2.5;
Image {
id: fade
property bool isForward : true
width: 100
height: 100
anchors.verticalCenter: parent.verticalCenter
opacity: 0.3
OpacityAnimator {
id: fadeIn
target: fade
from: fade.opacity
to: 1.0
duration: 500
running: false
}
OpacityAnimator {
id: fadeOut
target: fade
from: fade.opacity
to: 0.3
duration: 250
running: false
}
MouseArea {
anchors.fill: parent
hoverEnabled: true
onEntered: { fadeOut.running = false; fadeIn.running = true }
onExited: { fadeIn.running = false ; fadeOut.running = true }
onClicked: {
if (isForward)
fade.parent.goToNextSlide()
else
fade.parent.goToPreviousSlide()
}
}
}

View File

@ -0,0 +1,240 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* Copyright 2017, Adriaan de Groot <groot@kde.org>
* - added looping, keys-instead-of-shortcut
* Copyright 2018, Adriaan de Groot <groot@kde.org>
* - make looping a property, drop the 'c' fade-key
* - drop navigation through entering a slide number
* (this and the 'c' key make sense in a *presentation*
* slideshow, not in a passive slideshow like Calamares)
* - remove quit key
* Copyright 2019, Adriaan de Groot <groot@kde.org>
* - Support "V2" loading
* - Disable shortcuts until the content is visible in Calamares
*
* SPDX-License-Identifier: LGPL-2.1
* License-Filename: LICENSES/LGPLv2.1-Presentation
*/
/****************************************************************************
**
** Copyright (C) 2016 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the QML Presentation System.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia. For licensing terms and
** conditions see http://qt.digia.com/licensing. For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights. These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
import QtQuick 2.5
import QtQuick.Window 2.0
Item {
id: root
property variant slides: []
property int currentSlide: 0
property bool loopSlides: true
property bool showNotes: false;
property bool allowDelay: true;
property alias mouseNavigation: mouseArea.enabled
property bool arrowNavigation: true
property bool keyShortcutsEnabled: true
property color titleColor: textColor;
property color textColor: "black"
property string fontFamily: "Helvetica"
property string codeFontFamily: "Courier New"
// This is set by the C++ part of Calamares when the slideshow
// becomes visible. You can connect it to a timer, or whatever
// else needs to start only when the slideshow becomes visible.
//
// It is used in this example also to keep the keyboard shortcuts
// enabled only while the slideshow is active.
property bool activatedInCalamares: false
// Private API
property int _lastShownSlide: 0
Component.onCompleted: {
var slideCount = 0;
var slides = [];
for (var i=0; i<root.children.length; ++i) {
var r = root.children[i];
if (r.isSlide) {
slides.push(r);
}
}
root.slides = slides;
// Make first slide visible...
if (root.slides.length > 0)
root.slides[root.currentSlide].visible = true;
}
function switchSlides(from, to, forward) {
from.visible = false
to.visible = true
return true
}
onCurrentSlideChanged: {
switchSlides(root.slides[_lastShownSlide], root.slides[currentSlide], currentSlide > _lastShownSlide)
_lastShownSlide = currentSlide
// Always keep focus on the slideshow
root.focus = true
}
function goToNextSlide() {
if (root.slides[currentSlide].delayPoints) {
if (root.slides[currentSlide]._advance())
return;
}
if (currentSlide + 1 < root.slides.length)
++currentSlide;
else if (loopSlides)
currentSlide = 0; // Loop at the end
}
function goToPreviousSlide() {
if (currentSlide - 1 >= 0)
--currentSlide;
else if (loopSlides)
currentSlide = root.slides.length - 1
}
focus: true // Keep focus
// Navigation through key events, too
Keys.onSpacePressed: goToNextSlide()
Keys.onRightPressed: goToNextSlide()
Keys.onLeftPressed: goToPreviousSlide()
// navigate with arrow keys
Shortcut { sequence: StandardKey.MoveToNextLine; enabled: root.activatedInCalamares && root .arrowNavigation; onActivated: goToNextSlide() }
Shortcut { sequence: StandardKey.MoveToPreviousLine; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
Shortcut { sequence: StandardKey.MoveToNextChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToNextSlide() }
Shortcut { sequence: StandardKey.MoveToPreviousChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
// presentation-specific single-key shortcuts (which interfere with normal typing)
Shortcut { sequence: " "; enabled: root.activatedInCalamares && root.keyShortcutsEnabled; onActivated: goToNextSlide() }
// standard shortcuts
Shortcut { sequence: StandardKey.MoveToNextPage; enabled: root.activatedInCalamares; onActivated: goToNextSlide() }
Shortcut { sequence: StandardKey.MoveToPreviousPage; enabled: root.activatedInCalamares; onActivated: goToPreviousSlide() }
MouseArea {
id: mouseArea
anchors.fill: parent
acceptedButtons: Qt.LeftButton | Qt.RightButton
onClicked: {
if (mouse.button == Qt.RightButton)
goToPreviousSlide()
else
goToNextSlide()
}
onPressAndHold: goToPreviousSlide(); //A back mechanism for touch only devices
}
Window {
id: notesWindow;
width: 400
height: 300
title: "QML Presentation: Notes"
visible: root.showNotes
Flickable {
anchors.fill: parent
contentWidth: parent.width
contentHeight: textContainer.height
Item {
id: textContainer
width: parent.width
height: notesText.height + 2 * notesText.padding
Text {
id: notesText
property real padding: 16;
x: padding
y: padding
width: parent.width - 2 * padding
font.pixelSize: 16
wrapMode: Text.WordWrap
property string notes: root.slides[root.currentSlide].notes;
onNotesChanged: {
var result = "";
var lines = notes.split("\n");
var beginNewLine = false
for (var i=0; i<lines.length; ++i) {
var line = lines[i].trim();
if (line.length == 0) {
beginNewLine = true;
} else {
if (beginNewLine && result.length) {
result += "\n\n"
beginNewLine = false
}
if (result.length > 0)
result += " ";
result += line;
}
}
if (result.length == 0) {
font.italic = true;
text = "no notes.."
} else {
font.italic = false;
text = result;
}
}
}
}
}
}
}

View File

@ -0,0 +1,206 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* SPDX-License-Identifier: LGPL-2.1
* License-Filename: LICENSES/LGPLv2.1-Presentation
*/
/****************************************************************************
**
** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QML Presentation System.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia. For licensing terms and
** conditions see http://qt.digia.com/licensing. For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights. These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
import QtQuick 2.5
Item {
/*
Slides can only be instantiated as a direct child of a Presentation {} as they rely on
several properties there.
*/
id: slide
property bool isSlide: true;
property bool delayPoints: false;
property int _pointCounter: 0;
function _advance() {
if (!parent.allowDelay)
return false;
_pointCounter = _pointCounter + 1;
if (_pointCounter < content.length)
return true;
_pointCounter = 0;
return false;
}
property string title;
property variant content: []
property string centeredText
property string writeInText;
property string notes;
property real fontSize: parent.height * 0.05
property real fontScale: 1
property real baseFontSize: fontSize * fontScale
property real titleFontSize: fontSize * 1.2 * fontScale
property real bulletSpacing: 1
property real contentWidth: width
// Define the slide to be the "content area"
x: parent.width * 0.05
y: parent.height * 0.2
width: parent.width * 0.9
height: parent.height * 0.7
property real masterWidth: parent.width
property real masterHeight: parent.height
property color titleColor: parent.titleColor;
property color textColor: parent.textColor;
property string fontFamily: parent.fontFamily;
property int textFormat: Text.PlainText
visible: false
Text {
id: titleText
font.pixelSize: titleFontSize
text: title;
anchors.horizontalCenter: parent.horizontalCenter
anchors.bottom: parent.top
anchors.bottomMargin: parent.fontSize * 1.5
font.bold: true;
font.family: slide.fontFamily
color: slide.titleColor
horizontalAlignment: Text.Center
z: 1
}
Text {
id: centeredId
width: parent.width
anchors.centerIn: parent
anchors.verticalCenterOffset: - parent.y / 3
text: centeredText
horizontalAlignment: Text.Center
font.pixelSize: baseFontSize
font.family: slide.fontFamily
color: slide.textColor
wrapMode: Text.Wrap
}
Text {
id: writeInTextId
property int length;
font.family: slide.fontFamily
font.pixelSize: baseFontSize
color: slide.textColor
anchors.fill: parent;
wrapMode: Text.Wrap
text: slide.writeInText.substring(0, length);
NumberAnimation on length {
from: 0;
to: slide.writeInText.length;
duration: slide.writeInText.length * 30;
running: slide.visible && parent.visible && slide.writeInText.length > 0
}
visible: slide.writeInText != undefined;
}
Column {
id: contentId
anchors.fill: parent
Repeater {
model: content.length
Row {
id: row
function decideIndentLevel(s) { return s.charAt(0) == " " ? 1 + decideIndentLevel(s.substring(1)) : 0 }
property int indentLevel: decideIndentLevel(content[index])
property int nextIndentLevel: index < content.length - 1 ? decideIndentLevel(content[index+1]) : 0
property real indentFactor: (10 - row.indentLevel * 2) / 10;
height: text.height + (nextIndentLevel == 0 ? 1 : 0.3) * slide.baseFontSize * slide.bulletSpacing
x: slide.baseFontSize * indentLevel
visible: (!slide.parent.allowDelay || !delayPoints) || index <= _pointCounter
Rectangle {
id: dot
anchors.baseline: text.baseline
anchors.baselineOffset: -text.font.pixelSize / 2
width: text.font.pixelSize / 3
height: text.font.pixelSize / 3
color: slide.textColor
radius: width / 2
opacity: text.text.length == 0 ? 0 : 1
}
Item {
id: space
width: dot.width * 1.5
height: 1
}
Text {
id: text
width: slide.contentWidth - parent.x - dot.width - space.width
font.pixelSize: baseFontSize * row.indentFactor
text: content[index]
textFormat: slide.textFormat
wrapMode: Text.WordWrap
color: slide.textColor
horizontalAlignment: Text.AlignLeft
font.family: slide.fontFamily
}
}
}
}
}

View File

@ -0,0 +1,38 @@
/* === This file is part of Calamares - <https://github.com/calamares> ===
*
* Copyright 2018, Adriaan de Groot <groot@kde.org>
*
* Calamares is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Calamares is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Calamares. If not, see <http://www.gnu.org/licenses/>.
*/
/* This control just shows a (non-translated) count of the slides
* in the slideshow in the format "n / total".
*/
import QtQuick 2.5;
Rectangle {
id: slideCounter
anchors.right: parent.right
anchors.bottom: parent.bottom
width: 100
height: 50
Text {
id: slideCounterText
anchors.centerIn: parent
//: slide counter, %1 of %2 (numeric)
text: qsTr("%L1 / %L2").arg(parent.parent.currentSlide + 1).arg(parent.parent.slides.length)
}
}

View File

@ -0,0 +1,10 @@
module calamares.slideshow
Presentation 1.0 Presentation.qml
Slide 1.0 Slide.qml
NavButton 1.0 NavButton.qml
ForwardButton 1.0 ForwardButton.qml
BackButton 1.0 BackButton.qml
SlideCounter 1.0 SlideCounter.qml

View File

@ -0,0 +1,183 @@
# Configuration file for Calamares
# Syntax is YAML 1.2
---
# Modules can be job modules (with different interfaces) and QtWidgets view
# modules. They could all be placed in a number of different paths.
# "modules-search" is a list of strings, each of these can either be a full
# path to a directory or the keyword "local".
#
# "local" means:
# - modules in $LIBDIR/calamares/modules, with
# - settings in SHARE/calamares/modules or /etc/calamares/modules.
# In debug-mode (e.g. calamares -d) "local" also adds some paths
# that make sense from inside the build-directory, so that you
# can build-and-run with the latest modules immediately.
#
# Strings other than "local" are taken as paths and interpreted
# relative to wherever Calamares is started. It is therefore **strongly**
# recommended to use only absolute paths here. This is mostly useful
# if your distro has forks of standard Calamares modules, but also
# uses some form of upstream packaging which might overwrite those
# forked modules -- then you can keep modules somewhere outside of
# the "regular" module tree.
#
#
# YAML: list of strings.
modules-search: [ local ]
# Instances section. This section is optional, and it defines custom instances
# for modules of any kind. An instance entry has an module name, an instance
# name, and a configuration file name. The primary goal of this mechanism is
# to allow loading multiple instances of the same module, with different
# configuration. If you don't need this, the instances section can safely be
# left empty.
#
# Module name plus instance name makes an instance key, e.g.
# "webview@owncloud", where "webview" is the module name (for the webview
# viewmodule) and "owncloud" is the instance name. In the *sequence*
# section below, use instance-keys to name instances (instead of just
# a module name, for modules which have only a single instance).
#
# Every module implicitly has an instance with the instance name equal
# to its module name, e.g. "welcome@welcome". In the *sequence* section,
# mentioning a module without a full instance key (e.g. "welcome")
# means that implicit module.
#
# An instance must specify its configuration file (e.g. `webview-home.conf`).
# The implicit instances all have configuration files named `<module>.conf`.
# This (implict) way matches the source examples, where the welcome
# module contains an example `welcome.conf`.
#
# For more information on running module instances, run Calamares in debug
# mode and check the Modules page in the Debug information interface.
#
# A module that is often used with instances is shellprocess, which will
# run shell commands specified in the configuration file. By configuring
# more than one instance of the module, multiple shell sessions can be run
# during install.
#
# YAML: list of maps of string:string key-value pairs.
#instances:
#- id: owncloud
# module: webview
# config: owncloud.conf
# Sequence section. This section describes the sequence of modules, both
# viewmodules and jobmodules, as they should appear and/or run.
#
# A jobmodule instance key (or name) can only appear in an exec phase, whereas
# a viewmodule instance key (or name) can appear in both exec and show phases.
# There is no limit to the number of show or exec phases. However, the same
# module instance key should not appear more than once per phase, and
# deployers should take notice that the global storage structure is persistent
# throughout the application lifetime, possibly influencing behavior across
# phases. A show phase defines a sequence of viewmodules (and therefore
# pages). These viewmodules can offer up jobs for the execution queue.
#
# An exec phase displays a progress page (with brandable slideshow). This
# progress page iterates over the modules listed in the *immediately
# preceding* show phase, and enqueues their jobs, as well as any other jobs
# from jobmodules, in the order defined in the current exec phase.
#
# It then executes the job queue and clears it. If a viewmodule offers up a
# job for execution, but the module name (or instance key) isn't listed in the
# immediately following exec phase, this job will not be executed.
#
# YAML: list of lists of strings.
sequence:
- show:
- welcome
- locale
- keyboard
- partition
- users
- summary
- exec:
- partition
- mount
- unpackfs
- machineid
- fstab
- locale
- keyboard
- localecfg
- luksopenswaphookcfg
- luksbootkeyfile
- plymouthcfg
- initcpiocfg
- initcpio
- users
- displaymanager
- mhwdcfg
- networkcfg
- hwclock
- services
- grubcfg
- bootloader
- postcfg
- umount
- show:
- finished
# A branding component is a directory, either in SHARE/calamares/branding or
# in /etc/calamares/branding (the latter takes precedence). The directory must
# contain a YAML file branding.desc which may reference additional resources
# (such as images) as paths relative to the current directory.
#
# A branding component can also ship a QML slideshow for execution pages,
# along with translation files.
#
# Only the name of the branding component (directory) should be specified
# here, Calamares then takes care of finding it and loading the contents.
#
# YAML: string.
branding: tromjao
# If this is set to true, Calamares will show an "Are you sure?" prompt right
# before each execution phase, i.e. at points of no return. If this is set to
# false, no prompt is shown. Default is false, but Calamares will complain if
# this is not explicitly set.
#
# YAML: boolean.
prompt-install: false
# If this is set to true, Calamares will execute all target environment
# commands in the current environment, without chroot. This setting should
# only be used when setting up Calamares as a post-install configuration tool,
# as opposed to a full operating system installer.
#
# Some official Calamares modules are not expected to function with this
# setting. (e.g. partitioning seems like a bad idea, since that is expected to
# have been done already)
#
# Default is false (for a normal installer), but Calamares will complain if
# this is not explicitly set.
#
# YAML: boolean.
dont-chroot: false
# If this is set to true, Calamares refers to itself as a "setup program"
# rather than an "installer". Defaults to the value of dont-chroot, but
# Calamares will complain if this is not explicitly set.
# oem-setup: true
# If this is set to true, the "Cancel" button will be disabled entirely.
# The button is also hidden from view.
#
# This can be useful if when e.g. Calamares is used as a post-install
# configuration tool and you require the user to go through all the
# configuration steps.
#
# Default is false, but Calamares will complain if this is not explicitly set.
#
# YAML: boolean.
disable-cancel: false
# If this is set to true, the "Cancel" button will be disabled once
# you start the 'Installation', meaning there won't be a way to cancel
# the Installation until it has finished or installation has failed.
#
# Default is false, but Calamares will complain if this is not explicitly set.
#
# YAML: boolean.
disable-cancel-during-exec: false

Binary file not shown.

After

Width:  |  Height:  |  Size: 189 KiB