TROMjaro XFCE joins and takes over the party

tromjaro/xfce/live-overlay/etc/default/grub

@@ -0,0 +1,51 @@
+
+GRUB_DEFAULT=saved
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="TROMjaro"
+GRUB_CMDLINE_LINUX_DEFAULT=""
+GRUB_CMDLINE_LINUX=""
+
+# If you want to enable the save default function, uncomment the following
+# line, and set GRUB_DEFAULT to saved.
+GRUB_SAVEDEFAULT=true
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable Hidden Menu, and optionally hide the timeout count
+#GRUB_HIDDEN_TIMEOUT=5
+#GRUB_HIDDEN_TIMEOUT_QUIET=true
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `vbeinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter 
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" 
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper 
+# modes only.  Entries specified as foreground/background.
+#GRUB_COLOR_NORMAL="light-blue/black"
+#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+#GRUB_BACKGROUND="/usr/share/grub/trom-background.png"
+#GRUB_THEME="/boot/grub/themes/tromjaro-live/theme.txt"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"
+

tromjaro/xfce/live-overlay/etc/default/tlp

@@ -0,0 +1,221 @@
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power save
+
+# Hint: some features are disabled by default, remove the leading # to enable them
+
+# Set to 0 to disable/1 to enable TLP
+TLP_ENABLE=1
+
+# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
+# Important:
+# - You *must* disable your distribution's governor settings or conflicts will occur
+# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
+#CPU_SCALING_GOVERNOR_ON_AC=ondemand
+#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your cpu. For available frequencies see
+# tlp-stat output, Section "+++ Processor".
+# Hint: Parameters are disabled by default, remove the leading # to enable them,
+#       otherwise kernel default values are used.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set the cpu "turbo boost" feature: 0=disable / 1=allow
+# Requires an Intel Core i processor and kernel 3.7 or later.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used cpu cores/hyper-threads under light load conditions
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog
+# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
+# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Hard disk devices, separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk id too (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Hard disk advanced power management level: 1(max saving)..254(off)
+# Levels 1..127 may spin down the disk.
+# Separate values for multiple devices with spaces.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="254 254"
+
+# Hard disk spin down timeout:
+# 0:        spin down disabled
+# 1..240:   timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# (see 'man hdparm' for details)
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
+# Separate values for multiple devices with spaces.
+#DISK_IOSCHED="cfq cfq"
+
+# SATA aggressive link power management (ALPM):
+# min_power/medium_power/max_performance
+SATA_LINKPWR_ON_AC=max_performance
+SATA_LINKPWR_ON_BAT=min_power
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default/performance/powersave
+# Hint: needs kernel boot option pcie_aspm=force on some machines
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low/mid/high/auto/default
+# auto = mid on BAT, high on AC; default = use hardware defaults
+# (Kernel >= 2.6.35 only, not with fglrx driver!)
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# New radeon dynamic power management method (dpm): battery/performance
+# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# New radeon dpm performance level: auto/low/high (auto is recommended)
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: 1=disable/5=enable
+# (Linux 2.6.32 and later, some adapters only!)
+WIFI_PWR_ON_AC=1
+WIFI_PWR_ON_BAT=5
+
+# Disable wake on lan: Y/N
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables / >=1 enables power save.
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=1
+
+# Disable controller too (HDA only): Y/N
+SOUND_POWER_SAVE_CONTROLLER=Y
+
+# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
+# when running on battery. A value of 0 disables this Feature (Default).
+# Drive can be powered on again by releasing (and reinserting) the
+# eject lever or by pressing the disc eject button on newer models.
+# Note: an UltraBay hard disk is never powered off.
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0)
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for pci(e) bus devices
+# (Kernel >= 2.6.35 only): on=disable/auto=enable
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Runtime PM for *all* pci(e) bus devices, expect backlisted ones:
+# 0=disable / 1=enable
+# Warning: experimental option, could cause system instabilities
+RUNTIME_PM_ALL=0
+
+# Exclude pci(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Set to 0 to disable/1 to enable usb autosuspend feature
+USB_AUTOSUSPEND=1
+
+# Devices from the following list are excluded from usb autosuspend
+# (separate with spaces). Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# WWAN devices are excluded from usb autosuspend:
+# 0=do not exclude / 1=exclude
+# Note: works for ids 05c6:* 0bdb:* 1199:* only
+USB_BLACKLIST_WWAN=1
+
+# Set to 1 to disable autosuspend before shutdown/0 to do nothing
+# (workaround for usb devices that cause shutdown problems)
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
+# on system startup: 0=disable/1=enable
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+#       are ignored when this is enabled!
+RESTORE_DEVICE_STATE_ON_STARTUP=0
+
+# Radio devices to disable on startup: bluetooth wifi wwan
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth wifi wwan
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth wifi wwan
+# (workaround for devices that are blocking shutdown)
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth wifi wwan
+# (to prevent other operating systems from missing radios)
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable when wireless radio switch is turned on:
+# bluetooth wifi wwan (Ubuntu + ThinkPad only)
+#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
+# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
+# value and stops when exceeding the STOP_CHARGE_TRESH value.
+# Main battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay or slice battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
+# and force usage of tp-smapi instead
+#DISABLE_TPACPIBAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth/wifi/wwan
+
+# Hint: parameters are disabled by default, remove the leading # to enable them
+
+# Radio devices to disable on connect
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+