sync with manjaro's settings

This commit is contained in:
Tio TROM 2021-10-18 15:36:56 +02:00
parent d8c46541cf
commit 774faed5b7

View File

@ -1,12 +1,28 @@
# SPDX-FileCopyrightText: no
# SPDX-License-Identifier: CC0-1.0
#
# This setting specifies the mount point of the EFI system partition. Some
# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
# etc.) use just /boot.
#
# Defaults to "/boot/efi", may be empty (but weird effects ensue)
efiSystemPartition: "/boot/efi"
# This optional setting specifies the size of the EFI system partition.
# If nothing is specified, the default size of 300MiB will be used.
#
# This size applies both to automatic partitioning and the checks
# during manual partitioning. A minimum of 32MiB is enforced,
# 300MiB is the default, M is treated as MiB, and if you really want
# one-million (10^6) bytes, use MB.
#
# efiSystemPartitionSize: 300M
# This optional setting specifies the name of the EFI system partition (see
# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
# If nothing is specified, the partition name is left unset.
# efiSystemPartitionName: EFI
# In autogenerated partitioning, allow the user to select a swap size?
# If there is exactly one choice, no UI is presented, and the user
# cannot make a choice -- this setting is used. If there is more than
@ -28,12 +44,21 @@ efiSystemPartition: "/boot/efi"
# In both cases, a fudge factor (usually 10% extra) is applied so that there
# is some space for administrative overhead (e.g. 8 GiB swap will allocate
# 8.8GiB on disk in the end).
#
# If *file* is enabled here, make sure to have the *fstab* module
# as well (later in the exec phase) so that the swap file is
# actually created.
userSwapChoices:
- none # Create no swap, use no swap
- reuse # Re-use existing swap, but don't create any (unsupported right now)
- small # Up to 4GB
- suspend # At least main memory size
- file # To swap file instead of partition (unsupported right now)
# - reuse # Re-use existing swap, but don't create any (unsupported right now)
- file # To swap file instead of partition
# This optional setting specifies the name of the swap partition (see
# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
# If nothing is specified, the partition name is left unset.
# swapPartitionName: swap
# LEGACY SETTINGS (these will generate a warning)
# ensureSuspendToDisk: true
@ -45,6 +70,64 @@ drawNestedPartitions: false
# Show/hide partition labels on manual partitioning page.
alwaysShowPartitionLabels: true
# Allow manual partitioning.
#
# When set to false, this option hides the "Manual partitioning" button,
# limiting the user's choice to "Erase", "Replace" or "Alongside".
# This can be useful when using a custom partition layout we don't want
# the user to modify.
#
# If nothing is specified, manual partitioning is enabled.
#allowManualPartitioning: true
# Initial selection on the Choice page
#
# There are four radio buttons (in principle: erase, replace, alongside, manual),
# and you can pick which of them, if any, is initially selected. For most
# installers, "none" is the right choice: it makes the user pick something specific,
# rather than accidentally being able to click past an important choice (in particular,
# "erase" is a dangerous choice).
#
# The default is "none"
#
initialPartitioningChoice: none
#
# Similarly, some of the installation choices may offer a choice of swap;
# the available choices depend on *userSwapChoices*, above, and this
# setting can be used to pick a specific one.
#
# The default is "none" (no swap) if that is one of the enabled options, otherwise
# one of the items from the options.
initialSwapChoice: none
# Default partition table type, used when a "erase" disk is made.
#
# When erasing a disk, a new partition table is created on disk.
# In other cases, e.g. Replace and Alongside, as well as when using
# manual partitioning, this partition table exists already on disk
# and it is left unmodified.
#
# Suggested values: gpt, msdos
# If nothing is specified, Calamares defaults to "gpt" if system is
# efi or "msdos".
#
# Names are case-sensitive and defined by KPMCore.
# defaultPartitionTableType: msdos
# Requirement for partition table type
#
# Restrict the installation on disks that match the type of partition
# tables that are specified.
#
# Possible values: msdos, gpt. Names are case-sensitive and defined by KPMCore.
#
# If nothing is specified, Calamares defaults to both "msdos" and "gpt".
#
# requiredPartitionTableType: gpt
# requiredPartitionTableType:
# - msdos
# - gpt
# Default filesystem type, used when a "new" partition is made.
#
# When replacing a partition, the existing filesystem inside the
@ -61,6 +144,20 @@ alwaysShowPartitionLabels: true
# Names are case-sensitive and defined by KPMCore.
defaultFileSystemType: "ext4"
# Selectable filesystem type, used when "erase" is done.
#
# When erasing the disk, the *defaultFileSystemType* is used (see
# above), but it is also possible to give users a choice:
# list suitable filesystems here. A drop-down is provided
# to pick which is the filesystems will be used.
#
# The value *defaultFileSystemType* is added to this list (with a warning)
# if not present; the default pick is the *defaultFileSystemType*.
#
# If not specified at all, uses *defaultFileSystemType* without a
# warning (this matches traditional no-choice-available behavior best).
# availableFileSystemTypes: ["ext4","f2fs"]
# Show/hide LUKS related functionality in automated partitioning modes.
# Disable this if you choose not to deploy early unlocking support in GRUB2
# and/or your distribution's initramfs solution.
@ -74,52 +171,73 @@ defaultFileSystemType: "ext4"
# may arise as a consequence of setting this option to false.
# It is strongly recommended that system integrators put in the work to support
# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
# Support is offered to system integrators that wish to do so, through the
# Calamares bug tracker, as well as in #calamares on Freenode.
# For more information on setting up GRUB2 for Calamares with LUKS, see
# https://github.com/calamares/calamares/wiki/Deploy-LUKS
#
# If nothing is specified, LUKS is enabled in automated modes.
#enableLuksAutomatedPartitioning: true
# Allow manual partitioning.
# Partition layout.
#
# When set to false, this option hides the "Manual partitioning" button,
# limiting the user's choice to "Erase", "Replace" or "Alongside".
# This can be useful when using a custom partition layout we don't want
# the user to modify.
# This optional setting specifies a custom partition layout.
#
# If nothing is specified, manual partitioning is enabled.
#allowManualPartitioning: true
# To apply a custom partition layout, it has to be defined this way :
# If nothing is specified, the default partition layout is a single partition
# for root that uses 100% of the space and uses the filesystem defined by
# defaultFileSystemType.
#
# Note: the EFI system partition is prepend automatically to the layout if
# needed; the swap partition is appended to the layout if enabled (small of
# suspend).
#
# Otherwise, the partition layout is defined as follow:
#
# partitionLayout:
# - name: "rootfs"
# type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
# filesystem: "ext4"
# mountPoint: "/"
# size: 20%
# minSize: 500M
# maxSize: 10G
# attributes: 0xffff000000000003
# - name: "home"
# type = "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
# filesystem: "ext4"
# mountPoint: "/home"
# size: 3G
# minSize: 1.5G
# features:
# 64bit: false
# casefold: true
# - name: "data"
# filesystem: "fat32"
# mountPoint: "/data"
# features:
# sector-size: 4096
# sectors-per-cluster: 128
# size: 100%
#
# There can be any number of partitions, each entry having the following attributes:
# - name: partition label
# - filesystem: filesystem type
# - mountPoint: partition mount point
# - name: filesystem label
# and
# partition name (gpt only; since KPMCore 4.2.0)
# - uuid: partition uuid (optional parameter; gpt only; requires KPMCore >= 4.2.0)
# - type: partition type (optional parameter; gpt only; requires KPMCore >= 4.2.0)
# - attributes: partition attributes (optional parameter; gpt only; requires KPMCore >= 4.2.0)
# - filesystem: filesystem type (optional parameter)
# - if not set at all, treat as "unformatted"
# - if "unformatted", no filesystem will be created
# - if "unknown" (or an unknown FS name, like "elephant") then the
# default filesystem type, or the user's choice, will be applied instead
# of "unknown" (e.g. the user might pick ext4, or xfs).
# - mountPoint: partition mount point (optional parameter; not mounted if unset)
# - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
# or
# % of the available drive space if a '%' is appended to the value
# - minSize: minimum partition size (optional parameter)
# - maxSize: maximum partition size (optional parameter)
# - features: filesystem features (optional parameter; requires KPMCore >= 4.2.0)
# name: boolean or integer or string
# Checking for available storage
#